16716/P0332
From Ross-Tech Wiki
16716/P0332 - Knock Sensor 2 (G66): Signal Too Low
Possible Symptoms
- Irregular rpm
- Drivability problems
- Loss of power
- Engine damage
Possible Causes
- Circuit G66 short to Ground
- Circuit G66 open
- G66 improperly torqued
- G66 damaged
- Control Module damaged
Possible Solutions
- Torque Knock Sensor 2 (G66) to specifications
- Check wiring and connections
- Check Knock Sensor 2 (G66) and Knock Control
Special Notes
- The Knock sensor (piezoelectric sensor) is used to detect abnormal combustion events. Voltage (typically 0-5mV) is generated when the Knock sensor ‘hears/feels’ a range of vibrations. If the voltage is not as expected or is out of range this DTC is usually set.