1.9l PD-TDI (BRM)

From Ross-Tech Wiki

Jump to: navigation, search




Basic Setting

Kick Down


  • Ignition ON
  • Engine OFF
  • System voltage at least 11.0 V.

[01 - Engine]
[Basic Settings - 04]
Group 063
Activate the Basic Setting.
Press the pedal to the floor and hold it their for at least 2 seconds.
Observe Field 4, once the adaptation is successfully done it should show "ADP. O.K.".
[Done, Go Back]
[Close Controller, Go Back - 06]

  • Switch Ignition OFF.

Unless otherwise noted, all content on this site is Copyright © 2000-2010 by Ross-Tech LLC. All rights reserved.
"VCDS" is a Registered Trademark of Ross-Tech, LLC.
Ross-Tech is not affiliated with the Volkswagen Group in any way.