VW Passat (3C) Central Electronics

From Ross-Tech Wiki

Jump to: navigation, search

Contents

Coding

Adaptation

Channel 000: Reset Adaptation Channels

Reset all adaptation channels back to the original factory values.

Channel 001: Coming-Home Time

Time which the Coming-Home function will be active.

  • Range: 10...60 Seconds
  • Resolution: 10 Seconds
  • Note: Only active if Byte 00 Bit 7 of Long Coding active.

Channel 002: Leaving-Home Time

Time which the Leaving-Home function will be active.

  • Range: 10...60 Seconds
  • Resolution: 10 Seconds
  • Note: Only active if Byte 00 Bit 5 of Long Coding active.

Channel 003: Rear Window & Outside Mirror Heater Activation Time

Time which the Rear Window and Outside Mirror Heater will be active.

  • Range: 1...254 Minutes
  • Resolution: 1 Minute

Channel 004: Headlight Washer Activation Time

Time which the Headlight Washers will be active.

  • Range: 50...10000 ms
  • Resolution: 50 ms (Adaptation Value * Resolution = Actual Value)
  • Note: Only active if Byte 01 Bit 1 of Long Coding active.

Channel 005: Footwell Lighting Dimming

  • Range: 20...100 %
  • Resolution: 1 %
  • Note: Only active if Byte 00 Bit 1 of Long Coding active.

Channel 006: Load Management

  • Range: 0...3
  • Note: Only active if Byte 02 Bit 3 of Long Coding active.

Channel 007: Highbeam with Assistance Driving Light

  • 0 = inactive
  • 1 = active

Channel 008: Assistance Driving Light Activation/Deactivation Delay

  • Range: 0...10200 ms
  • Resolution: 40 ms



Replacement

  • Run and save a complete Auto-Scan and save it prior to module removal. See the Online Manual Auto-Scan.
  • Code the new module with the Coding from the original module found in the Auto-Scan.
  • Clear fault codes and verify all functions are working as per design.

Note, If the replacement module uses a longer coding length you cannot copy and paste the original coding directly into the replacement module. This example is from a 2006 Passat:

Original module

Address 09: Cent. Elect.        Labels: 3C0-937-049-23-H.lbl
  Part No SW: 3C0 937 049 Q    HW: 3C0 937 049 Q
  Component: Bordnetz-SG     H46 1501  
  Coding: 14848F0340041A00470A00000F00000000285D435C0000

Replacement Module

Address 09: Cent. Elect.        Labels:. 3C0-937-049-30-H.lbl
  Part No SW: 3C8 937 049 AC    HW: 3C8 937 049 AC
  Component: Bordnetz-SG     H64 3205
   Coding: 008C0F000004100040000000000000000000FF0F5C004800000000000000

In that example, you would use the original coding and add 14 zeros to the end. That will convert the original 23 Byte (46 digit) to the new 30 Byte (60 digit) coding format needed for the replacement module.

14848F0340041A00470A00000F00000000285D435C0000 14848F0340041A00470A00000F00000000285D435C000000000000000000

The last coding string in the above example would be accepted by the 3C8 937 049 AC module.




Unless otherwise noted, all content on this site is Copyright © 2000-2010 by Ross-Tech LLC. All rights reserved.
"VCDS" is a Registered Trademark of Ross-Tech, LLC.
Ross-Tech is not affiliated with the Volkswagen Group in any way.