VW Golf VII (5G/AU) CAN Gateway

From Ross-Tech Wiki

Jump to: navigation, search



Use the Installation List function to check or uncheck the modules installed in the vehicle.


Mk7 based cars like this should support the following method for turning off transport mode:

Make sure the key is ON but the engine is OFF.

  • [Select]
  • [19 - CAN Gateway]
  • [Adaptation - 10]
  • From the Channel pulldown menu, select "IDE00002 Transport mode"
  • The stored value will show "Transport mode"
  • Use the New Value pulldown menu to select "not active"
  • [Do It!]

Unless otherwise noted, all content on this site is Copyright © 2000-2010 by Ross-Tech LLC. All rights reserved.
"VCDS" is a Registered Trademark of Ross-Tech, LLC.
Ross-Tech is not affiliated with the Volkswagen Group in any way.