View source for 3.0l V6 TDI (BKS/BMK/BUN)

__FORCETOC__
== Coding ==
== Coding-II ==

* 10016 = Particle Filter Emergency Regeneration


== Adaptation ==
== Basic Setting ==
== Special Functions ==
=== Particle Filter Emergency Regeneration ===

'''<u>Prerequisites:</u>'''<br>
* Ignition ON
* Engine ON (Idle)
* Oil Temperature above 70 °C ''(see MVB 007.2)''
* Particle Filter Load below 68g ''(see MVB 104.3)''
* Engine Hood CLOSED
* Parking Brake ENGAGED
* Transmission in (P)ARK
* Temperatures at the Exhaust System may rise up to 300 °C!!!
* No Fault Codes Stored
* Power Consumers ON ''(Light, Seat Heating, Front/Rear Window Heater, Climate Control)''

The Regeneration may take up to 40 minutes, the engine speed automatically increases to about 1500 RPM.

'''[Select]'''<br>
'''[01 - Engine]'''<br>

'''[Coding-II - 11]'''<br>
* Start Regeneration by Entering '''10016'''.
'''[Do It!]'''<br>

'''[Meas. Blocks - 08]'''<br>
Select all 3 Groups at once 100, 101 and 102<br>
'''[Go!]'''<br>
MVB 100.1: Engine Speed<br>
MVB 100.3: Regeneration Counter/Timer<br>
MVB 100.4: Regeneration Abort recognized ''(0 = No Abort/1 = Abort recognized)''<br>
MVB 101.4: Regeneration Status ''(001 = Heating Up, 010 = Regeneration, 100 = Cooling Down)''<br>
MWV 102.1: Temperature before Catalyst<br>
MWV 102.2: Temperature before Particle Filter<br>
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>


[[Category:Engines]]
[[Category:Diesel Engines]]