View source for Exhaust Gas Recirculation (EGR) Valve Adaptation

__NOTOC__
== Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR) ==

'''<u>Prerequisites (General):</u>'''<br>
* Ignition ON
* Engine OFF
* Battery voltage at least 11.5 V


'''[Select]'''<br>
'''[01 - Engine]'''<br>
'''[Meas. Blocks - 08]'''<br>
Select Group 074.<br>
'''[Go!]'''<br>
MVB 074.1: Min Position in Volts<br>
MVB 074.2: Max Position in Volts<br>
MVB 074.3: Potentiometer voltage<br>
MVB 074.4: Adaption status: (Run/OK/etc) <br>
'''[Switch to Basic Settings]'''<br>
MVB 074.4: Adaption status: (Run) then it should change to (ADP OK)<br>
'''[Switch to Measuring Blocks]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>

'''<u>Special Notes:</u>'''<br>
* For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C.
* In case the adaptation fails switch OFF the Ignition for 30 Seconds, then switch it ON and try again.