View source for VW New Beetle/Cabriolet (1C/1Y/9C) Airbag

__FORCETOC__

== Coding ==

VAG-COM will automatically tell you a suggested coding (HEX interface required), otherwise [http://www.ross-tech.com/contact.html contact us] for assistance.<br><br>

== Adaptation ==

Used to deactivate individual airbag components (see repair manual for details).<br><br>

== Basic Setting ==

=== Seat Occupied Recognition Control Module (J706) ===

If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed.

'''[Select]'''<br>
'''[15 - Airbags]'''<br>
'''[Security Access - 16]'''<br>
Enter 11063, to enable the basic setting.<br>
'''[Do it!]'''<br>
'''[Basic Settings - 04]'''<br>
Group 001<br>
'''[Go!]'''<br>
Activate the Basic Setting.<br>
'''[ON/OFF/Next]'''<br>
The reset has been performed.<br>
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>

== Special Procedures ==

=== Seat Occupied Recognition Control Module (J706): Reset ===

If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too.

'''<u>Prerequisites:</u>'''
* Seat in normal position.
* Seat must NOT be occupied during the whole procedure.
* Seatbelt must NOT be plugged in.
* No faults in the system.
* Interior temperature must be between 0 °C and 37 °C (32 °F and 98 °F).<br><br>

'''[Select]'''<br>
'''[15 - Airbags]'''<br>
'''[Security Access - 16]'''<br>
Enter 13731, to enable the basic setting.<br>
'''[Do it!]'''<br>
'''[Adaptation - 10]'''<br>
Channel 000<br>
'''[Read]'''<br>
'''[Save]'''<br>
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>