View source for VW Passat (3B) Brake Electronics (Bosch 5.7)

__FORCETOC__
== Login ==

'''''Note #1''': After Login has been carried out you need to recode the control module.''<br>
'''''Note #2''': Special Login 07499 is used for 6-Cylinder Diesel Engine with 1LG Brakes and Multitronic.''<br>
'''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png here to see an Example of a Sticker].''<br>

*'''0?xxx''': ''Chassis''
**8 = VW Passat W8
**9 = VW Passat
*'''0x?xx''': ''Brakes''
**3 = (PR-1LT/1LF)
**4 = (PR-1LC/1LX/1ZF/1LZ/1ZG)
**5 = (PR-1LB/1LE/1ZC)
**6 = (PR-1LZ/1ZJ)
*'''0xx?x''': ''Engine''
**5 = (PR-T5X/T4N/T9J*/T6T/T1K/T1E/T7F*) (* with Brakes: PR-1LB/1LE/1ZC)
**7 = (PR-T0B/T10/T6V/T0D/T0F)
**9 = (PR-T7F/T9H/T9J)
*'''0xxx?''': ''Transmission''
**5 = Manual (PR-G0C/G0K/G0G/G0L)
**7 = Automatic (PR-G0E/G0F/G0Q)

== Coding ==

'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
'''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png here to see an Example of a Sticker].''<br>

*'''0?xxx''': ''Chassis''
**4 = VW Passat
**5 = VW Passat W8
*'''0x?xx''': ''Brakes''
**1 = (PR-1LZ/1ZJ)
**2 = (PR-1LB/1LE/1ZC)
**3 = (PR-1LC/1LX/1ZF/1LZ/1ZG)
**4 = (PR-1LT/1LF)
*'''0xx?x''': ''Engine''
**5 = (PR-T5X/T4N/T9J*/T6T/T1K/T1E/T7F*) (* with Brakes: PR-1LB/1LE/1ZC)
**7 = (PR-T0B/T10/T6V/T0D/T0F)
**9 = (PR-T7F/T9H/T9J)
*'''0xxx?''': ''Transmission''
**5 = Manual (PR-G0C/G0K/G0G/G0L)
**7 = Automatic (PR-G0E/G0F/G0Q)

== Basic Setting ==

=== Steering Angle Sensor (G85) Calibration ===

Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br>

'''[Meas. Blocks - 08]'''<br>
Group 005 Field 1 (Steering Angle Sensor -G85-)<br>
Specification: 0.0 °<br>
Tolerance (when straight): ±5.0 °<br>
'''[Done, Go Back]'''<br>

'''[Login - 11]'''<br>
Enter 40168<br>
'''[Do It!]'''<br>

'''[Basic Settings - 04]'''<br>
Group 001<br>
'''[Go!]'''<br>
'''[Done, Go Back]'''<br>

'''[Fault Codes - 02]'''<br>
All fault codes should have disappeared.<br>
'''[Done, Go Back]'''<br>
__FORCETOC__