View source for Audi A5 (8T) Brake Electronics (Bosch 8.0)

From Ross-Tech Wiki

← Audi A5 (8T) Brake Electronics (Bosch 8.0)

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

__FORCETOC__ == Coding == '''Coding a Bosch 8.0 Control Module from scratch is normally done via Software Version Management (SVM).''' If the old Control Module is still accessible read/copy it's Coding to the new Module. If that is not possible we may be able to help Registered VCDS users. Registered users encountering difficulty can join and post the inquiry in our [http://forums.ross-tech.com/ forum] -or- contact us directly via [mailto:Support@Ross-Tech.com email] with the complete Auto-Scan.<br> Note: A Security Access Code is required prior to Coding. The code will appear in a pop-up balloon when connected to the 03-ABS Brake control module under the [Security Access-16] function.<br> == Basic Setting == === Sensor for Steering Angle (G85) === The Steering Angle Sensor (G85) Calibration is performed in address [[Audi A4 (8K) Steering Wheel Electronics|[16] - Steering Wheel Electronics]].

Return to Audi A5 (8T) Brake Electronics (Bosch 8.0).