View source for VW Golf VII (5G/AU) Instrument Cluster

__FORCETOC__
== Coding ==

Coding information is available while connected to the vehicle with VCDS  using the '''[http://www.ross-tech.com/vcds/tour/recode_screen.html Long Coding Helper]'''.


----

== Adaptation ==

=== Service Reminder ===

Unlike previous models that used the '''[http://www.ross-tech.com/vcds/tour/sri-reset.html  [SRI Reset]]''' function, the newer protocol UDS/ODX modules do not support conventional Adaptation Channels. The '''[SRI Reset]''' function will not work and will result in a message like this:<br>

http://wiki.ross-tech.com/wiki/images/b/b0/SRI_-_UDS_-_ESI.png<br>


==== Oil Change Service Reminder ====
To Reset the basic '''Oil Change Service Reminder''' the procedure will need to be done manually: <br>

'''[17 - Instruments]'''<br>
'''[Adaptation - 10]'''<br>
Choose '''"ESI: Resetting ESI"''' from the drop-down menu.<br>
http://wiki.ross-tech.com/wiki/images/e/ed/ESI_w-options.png<br>
Choose Reset from the drop-down menu<br>
'''[Do It!]'''<br>
It may be necessary to cycle the key before the service warning is cleared.<br>


==== Distance and Time based Service ====
'''Distance and Time based Service''' Intervals need to be reset when the basic Oil Change Service Reminder does not correct the warning. This requires resetting values in two different channels.<br>

'''[17 - Instruments]'''<br>
'''[Adaptation - 10]'''<br>
Choose '''"FIX: Distance covered since last mileage-dependent inspection"''' from the drop-down menu.<br>

http://wiki.ross-tech.com/wiki/images/c/cd/Distance_covered_since_last_mileage-dependent_inspection.png<br>

Enter 0 into the new value<br>
'''[Do It!]'''<br>
<br>
Next, choose '''FIX: Time since last time-dependent inspection''' from the drop-down menu.<br>

http://wiki.ross-tech.com/wiki/images/7/76/Time_since_last_time-dependent_inspection.png<br>

Enter 0 into the new value<br>
'''[Do It!]'''<br>
It may be necessary to cycle the key before the service warning is cleared.<br>


----

=== Special Notes ===

* If an Adaptation Error warning indicating that the control module is Uninitialized you must let VCDS write defaults to the WSC, Importer and Equipment numbers before the value can be changed. Click '''[Yes]'''  followed by '''[Do It!]'''<br>

http://wiki.ross-tech.com/wiki/images/a/a2/Adaptation_Error_WSC_small.PNG

== Video Link ==

=== SRI Reset ===

[[File:SRIreset.jpg|200px|link=https://www.youtube.com/watch?v=FHxxhRH7Dws]]

https://www.youtube.com/watch?v=FHxxhRH7Dws