View source for Audi A6 (4G/4H) Headlight Regulation Basic

__FORCETOC__

This page applies to Audi A4 (8K/FL) and A6/A7/A8 (4G/4H) Chassis vehicles with '''Headlight Regulation Basic''' LED headlights.  This can be identified by evaluating the data in the Auto-Scan:

 Address 55: Xenon Range (J431)       Labels: 8X0-907-357.clb
   Part No SW: 4H0 907 357 A    HW: 4H0 907 357 A
   Component: ....LWR12.... H02 0013  
   ASAM '''Dataset: EV_HeadlRegulBasic''' 005001
   ROD: '''EV_HeadlRegulBasic.rod'''


== Coding ==

== Adaptation ==

== Security Access ==
* Will appear in a pop-up balloon when connected to this controller.

== Basic Setting ==
=== Headlight Adjustment ===
'''<u>Prerequisites:</u>'''<br>
* Vehicle must be parked on level ground and settled on its suspension<br>

'''[Select]'''<br>
'''[55 - Xenon Range]'''<br>
'''[Basic Settings - 04]'''<br>
Select '''Basic headlamp setting''' from the drop-down menu.<br>
'''[Go!]''' to activate the Basic Setting.<br>
* The meas. block field will show Running. <br>
* Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target. <br>
'''[Stop]''' after any needed mechanical adjustments are completed.<br>

Select '''Acknowledge basic setting'''<br>
'''[Go!]''' to activate the Basic Setting.<br>
The adjustment should now be learned.<br>
'''[Stop]'''<br>
'''[Done, Go Back]'''<br>
Don't forget to check/clear fault codes afterwards.<br>
'''[Close Controller, Go Back - 06]'''<br>