View source for MLB based Trunk Electronics (J605)

From Ross-Tech Wiki

← MLB based Trunk Electronics (J605)

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

__FORCETOC__ This page applies to MLB based Address '''6D-Trunk Elect.''' (J605) installed in MLB based models such as the Audi '''A4''' ''(8K)'' Wagon/Avant and '''Q5''' ''(8R)''. The installed Trunk Electronics module can be identified by evaluating the data in the Auto-Scan. The Component field will include '''J605 Master''': Address 6D: Trunk Elect. (J605) Labels: 8K9-827-851.clb Part No SW: 8R0 827 851 B HW: 8R0 827 851 B Component: J605 Master H27 0300 Subsystem 1 - Part No SW: 8R0 827 852 B HW: 8R0 827 852 B Component: J756 Slave H27 0300 Address 6D: Trunk Elect. (J605) Labels: 8K9-827-851.clb Part No SW: 8K9 827 851 HW: 8K9 827 851 Component: J605 Master H27 0240 Subsystem 1 - Part No SW: 8K9 827 852 HW: 8K9 827 852 Component: J756 Slave H27 0240 Beneath the master module details slave information Component: '''J756 Slave''' will be shown as well when everything is communicating properly. == Coding == * This module does not support Coding. == Adaptation == * The Adjustable opening stop can be set using Adaptation. Information will be shown when using the '''[https://www.ross-tech.com/vcds/tour/adaptation_screen.php Adaptation function]''' while connected to the vehicle with VCDS.

Return to MLB based Trunk Electronics (J605).