16490/P0106/000262 - Revision history

Dana at 19:29, 6 June 2023

2023-06-06T19:29:48Z

← Older revision		Revision as of 19:29, 6 June 2023
Line 39:		Line 39:
	** https://static.nhtsa.gov/odi/tsbs/2014/SB-10069633-2280.pdf NHTSA		** https://static.nhtsa.gov/odi/tsbs/2014/SB-10069633-2280.pdf NHTSA

			===== 1.4T Gasoline specific notes =====
			* When this DTC is stored in North American Region (NAR) vehicles with the 1.4T make sure the software level in the 01-Engine control module is up to date. It may be stored in conjunction with [[16621/P0237/000567 \| P0237]]. ''Internal ref to ST?ID=108190''
	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Jef: /* 2.5L Gasoline specific notes */

2021-03-19T00:10:33Z

2.5L Gasoline specific notes

← Older revision		Revision as of 00:10, 19 March 2021
Line 36:		Line 36:
	* Measuring block 201.3 appears to contain the F96 ECM Baro pressure sensor in the CBTA 2.5L in addition to older MAF equipped 2.5L engines such as the BGP. <font color=white>ST?ID=79232</font>		* Measuring block 201.3 appears to contain the F96 ECM Baro pressure sensor in the CBTA 2.5L in addition to older MAF equipped 2.5L engines such as the BGP. <font color=white>ST?ID=79232</font>
	* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".		* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".
	* When found in NAR (North American Region) 2011-~~2013~~ Jetta, Golf, Passat and New Beetle vehicles with 2.5L engine codes CBTA and CBUA see TSB 01-14-23 -or- TPI 2034012. When applicable, DTCs P050A, [[16891/P0507/001287 \| P0507]] and P0106 are resolved after flash updating the Engine controller.		* When found in NAR (North American Region) 2011-2014 Jetta, Golf, Passat and New Beetle vehicles with 2.5L engine codes CBTA and CBUA see TSB 01-14-23 -or- TPI 2034012. When applicable, DTCs P050A, [[16891/P0507/001287 \| P0507]] and P0106 are resolved after flash updating the Engine controller.
			** https://static.nhtsa.gov/odi/tsbs/2014/SB-10069633-2280.pdf NHTSA

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Dana at 19:56, 7 November 2019

2019-11-07T19:56:58Z

← Older revision		Revision as of 19:56, 7 November 2019
Line 29:		Line 29:
	* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.		* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.
	* The F96 can be an internal part of the ECM.		* The F96 can be an internal part of the ECM.
			* When checking for leaks in the Air Intake system:
			** Make sure to closely check hard plastic brake booster lines near check valves and barbed adapters where cracks are most frequently found.
			** Make sure the PCV system is not malfunctioning and that the dipstick tube (when applicable) is not cracked or leaking at the junction to the cylinder block.

	===== 2.5L Gasoline specific notes =====		===== 2.5L Gasoline specific notes =====

Dana at 14:25, 19 December 2017

2017-12-19T14:25:16Z

← Older revision		Revision as of 14:25, 19 December 2017
Line 29:		Line 29:
	* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.		* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.
	* The F96 can be an internal part of the ECM.		* The F96 can be an internal part of the ECM.

			===== 2.5L Gasoline specific notes =====
			* Measuring block 201.3 appears to contain the F96 ECM Baro pressure sensor in the CBTA 2.5L in addition to older MAF equipped 2.5L engines such as the BGP. <font color=white>ST?ID=79232</font>
	* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".		* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".
	* When found in NAR (North American Region) 2011-2013 Jetta, Golf, Passat and New Beetle vehicles with 2.5L engine codes CBTA and CBUA see TSB 01-14-23 -or- TPI 2034012. When applicable, DTCs P050A, [[16891/P0507/001287 \| P0507]] and P0106 are resolved after flash updating the Engine controller.		* When found in NAR (North American Region) 2011-2013 Jetta, Golf, Passat and New Beetle vehicles with 2.5L engine codes CBTA and CBUA see TSB 01-14-23 -or- TPI 2034012. When applicable, DTCs P050A, [[16891/P0507/001287 \| P0507]] and P0106 are resolved after flash updating the Engine controller.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Dana at 16:24, 9 November 2016

2016-11-09T16:24:10Z

← Older revision		Revision as of 16:24, 9 November 2016
Line 30:		Line 30:
	* The F96 can be an internal part of the ECM.		* The F96 can be an internal part of the ECM.
	* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".		* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".
			* When found in NAR (North American Region) 2011-2013 Jetta, Golf, Passat and New Beetle vehicles with 2.5L engine codes CBTA and CBUA see TSB 01-14-23 -or- TPI 2034012. When applicable, DTCs P050A, [[16891/P0507/001287 \| P0507]] and P0106 are resolved after flash updating the Engine controller.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Jef: /* Possible Causes */

2016-02-05T16:08:36Z

Possible Causes

← Older revision		Revision as of 16:08, 5 February 2016
Line 11:		Line 11:
	* Leak in Air Intake and/or Exhaust		* Leak in Air Intake and/or Exhaust
	* Manifold/Barometric Pressure Sensor (G71)/(F96) faulty		* Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
			* Manifold/Barometric Pressure Sensor (G71)/(F96) wrong part installed, see notes.
	* Engine Control Module faulty		* Engine Control Module faulty

Jef: /* Special Notes */

2016-02-05T16:08:31Z

Special Notes

← Older revision		Revision as of 16:08, 5 February 2016
Line 28:		Line 28:
	* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.		* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.
	* The F96 can be an internal part of the ECM.		* The F96 can be an internal part of the ECM.
			* On some 2.5L engines, there can be a Secondary Air Injection (SAI) sensor, G609. This sensor and the MAP sensor can have the same physical shape and be mixed up. MAP sensors will start with part number "03C" and SAI sensors will start with part number "07C".

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Jef: /* Special Notes */

2014-10-30T16:23:57Z

Special Notes

← Older revision		Revision as of 16:23, 30 October 2014
Line 27:		Line 27:

	* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.		* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.
			* The F96 can be an internal part of the ECM.

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

RtWiKiSyS0p at 12:43, 29 March 2008

2008-03-29T12:43:26Z

← Older revision		Revision as of 12:43, 29 March 2008
Line 8:		Line 8:
	==== Possible Causes ====		==== Possible Causes ====

	* Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)7(F96) faulty		* Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
	* Leak in Air Intake and/or Exhaust		* Leak in Air Intake and/or Exhaust
	* Manifold/Barometric Pressure Sensor (G71)7(F96) faulty		* Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
	* Engine Control Module faulty		* Engine Control Module faulty

Line 19:		Line 19:
	* Check Timing		* Check Timing
	** See Special Notes for Details		** See Special Notes for Details
	* Check Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)7(F96)		* Check Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)/(F96)
	* Check for Leak in Air Intake and/or Exhaust		* Check for Leak in Air Intake and/or Exhaust
	* Check/Replace Manifold/Barometric Pressure Sensor (G71)7(F96)		* Check/Replace Manifold/Barometric Pressure Sensor (G71)/(F96)
	* Check/Replace Engine Controle Module		* Check/Replace Engine Controle Module

RtWiKiSyS0p: 16490/P0106 moved to 16490/P0106/000262

2007-11-14T01:00:10Z

16490/P0106 moved to 16490/P0106/000262

← Older revision		Revision as of 01:00, 14 November 2007
(No difference)