17755/P1347/004935 - Revision history

Jef: /* Special Notes */

2013-03-18T15:24:50Z

Special Notes

← Older revision		Revision as of 15:24, 18 March 2013
Line 20:		Line 20:
	* When found in VR6 4 Valve (BDF, BJS, BAA,) engines in conjunction with [[17748/P1340/004928 \| 17748]] please see Technical Bulletin 15-07-03. ''The previous Technical Bulletin number was 15-04-01.''		* When found in VR6 4 Valve (BDF, BJS, BAA,) engines in conjunction with [[17748/P1340/004928 \| 17748]] please see Technical Bulletin 15-07-03. ''The previous Technical Bulletin number was 15-04-01.''
	* When found in a 30-valve V6 gasoline Audi engine (such as EPB or BEL), DTC 17748 may be stored as well. If both of these codes are displayed simultaneously, and the codes only appear after the motor is revved above 1800RPM, then the issue is likely that the cam chain tensioners were installed on the incorrect heads (drivers' tensioner on passenger head, etc).		* When found in a 30-valve V6 gasoline Audi engine (such as EPB or BEL), DTC 17748 may be stored as well. If both of these codes are displayed simultaneously, and the codes only appear after the motor is revved above 1800RPM, then the issue is likely that the cam chain tensioners were installed on the incorrect heads (drivers' tensioner on passenger head, etc).
			* On engines with chain driven intake camshaft(s), but belt driven exhaust camshaft(s), verify the number of chain roller links between the intake and exhaust camshafts is correct. Click on thumbnail to enlarge:
			[[File:Cam_timing_chains.gif\|200px]]

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Dana at 20:53, 20 September 2011

2011-09-20T20:53:25Z

← Older revision		Revision as of 20:53, 20 September 2011
Line 18:		Line 18:
	==== Special Notes ====		==== Special Notes ====

	* When found on VR6 ~~engine~~, please see Technical Bulletin 15 04-01		* When found in VR6 4 Valve (BDF, BJS, BAA,) engines in conjunction with [[17748/P1340/004928 \| 17748]] please see Technical Bulletin 15-07-03. ''The previous Technical Bulletin number was 15-04-01.''
	* When found in a 30-valve V6 gasoline Audi engine (such as EPB or BEL), DTC 17748 may be stored as well. If both of these codes are displayed simultaneously, and the codes only appear after the motor is revved above 1800RPM, then the issue is likely that the cam chain tensioners were installed on the incorrect heads (drivers' tensioner on passenger head, etc).		* When found in a 30-valve V6 gasoline Audi engine (such as EPB or BEL), DTC 17748 may be stored as well. If both of these codes are displayed simultaneously, and the codes only appear after the motor is revved above 1800RPM, then the issue is likely that the cam chain tensioners were installed on the incorrect heads (drivers' tensioner on passenger head, etc).

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Andy at 14:21, 4 April 2011

2011-04-04T14:21:32Z

← Older revision		Revision as of 14:21, 4 April 2011
Line 19:		Line 19:

	* When found on VR6 engine, please see Technical Bulletin 15 04-01		* When found on VR6 engine, please see Technical Bulletin 15 04-01
			* When found in a 30-valve V6 gasoline Audi engine (such as EPB or BEL), DTC 17748 may be stored as well. If both of these codes are displayed simultaneously, and the codes only appear after the motor is revved above 1800RPM, then the issue is likely that the cam chain tensioners were installed on the incorrect heads (drivers' tensioner on passenger head, etc).

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

Jef: /* Possible Solutions */

2010-10-05T14:44:41Z

Possible Solutions

← Older revision		Revision as of 14:44, 5 October 2010
Line 15:		Line 15:
	* Check/Replace Camshaft Position Sensor 2 (G163)		* Check/Replace Camshaft Position Sensor 2 (G163)
	* Check/Replace Engine Speed Sensor (G28)		* Check/Replace Engine Speed Sensor (G28)

			==== Special Notes ====

			* When found on VR6 engine, please see Technical Bulletin 15 04-01

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

RtWiKiSyS0p at 13:50, 30 July 2007

2007-07-30T13:50:07Z

← Older revision		Revision as of 13:50, 30 July 2007
Line 4:		Line 4:
	==== Possible Causes ====		==== Possible Causes ====

	* Timing Belt incorrectly installed		* Timing Belt/Chain incorrectly installed
			** Timing Chain probably lengthened
	* Camshaft Position Sensor 2 (G163) faulty		* Camshaft Position Sensor 2 (G163) faulty
	* Engine Speed Sensor (G28) faulty		* Engine Speed Sensor (G28) faulty
Line 10:		Line 11:
	==== Possible Solutions ====		==== Possible Solutions ====

	* Check Timing Belt installation		* Check Timing Belt/Chain installation
			** Use Measuring Value Blocks (MVB) to Check Timing Chain
	* Check/Replace Camshaft Position Sensor 2 (G163)		* Check/Replace Camshaft Position Sensor 2 (G163)
	* Check/Replace Engine Speed Sensor (G28)		* Check/Replace Engine Speed Sensor (G28)

	[[Category:Fault Codes]]		[[Category:Fault Codes]]

RtWiKiSyS0p at 00:43, 28 July 2007

2007-07-28T00:43:56Z

New page

__FORCETOC__
== 17755/P1347/004935 - Camshaft Position Sensor 2 (G163) / Engine Speed Sensor (G28): Incor. Correl. ==

==== Possible Causes ====

* Timing Belt incorrectly installed
* Camshaft Position Sensor 2 (G163) faulty
* Engine Speed Sensor (G28) faulty

==== Possible Solutions ====

* Check Timing Belt installation
* Check/Replace Camshaft Position Sensor 2 (G163)
* Check/Replace Engine Speed Sensor (G28)
[[Category:Fault Codes]]