7-Speed Direct Shift Gearbox (DSG/0BH/0BT) - Revision history

Dana: /* DQ500 - Basic Settings Procedure */

2025-03-19T16:04:22Z

DQ500 - Basic Settings Procedure

← Older revision		Revision as of 16:04, 19 March 2025
Line 34:		Line 34:
	'''[Select] - [02 - Transmission]'''<br>		'''[Select] - [02 - Transmission]'''<br>
	:'''[Basic Settings - UDS]'''<br>		:'''[Basic Settings - UDS]'''<br>
	:Select '''[Basic ~~settings~~ of transmission]''' ''(Do not press [Go!] yet!)''		:Select '''[IDE02903] Basic setting of transmission''' ''(Do not press [Go!] yet!)''

	Select the following '''[Show Measuring Data]''' values:		Select the following '''[Show Measuring Data]''' values:
Line 52:		Line 52:
	: '''Important!''' Cycle the ignition '''Off''' and then Back '''On!''' <br>		: '''Important!''' Cycle the ignition '''Off''' and then Back '''On!''' <br>
	::''(Failure to complete this last step will result in the inability to select any gear!)''		::''(Failure to complete this last step will result in the inability to select any gear!)''



	== Special Notes ==		== Special Notes ==

Sebastian1: Sebastian1 moved page 6-Speed Direct Shift Gearbox (DSG/0BH/0BT) to 7-Speed Direct Shift Gearbox (DSG/0BH/0BT)

2025-03-19T15:27:33Z

Sebastian1 moved page 6-Speed Direct Shift Gearbox (DSG/0BH/0BT) to 7-Speed Direct Shift Gearbox (DSG/0BH/0BT)

← Older revision		Revision as of 15:27, 19 March 2025
(No difference)

Sebastian1: Sebastian1 moved page DQ500 DSG 7-speed transmission to 6-Speed Direct Shift Gearbox (DSG/0BH/0BT): Naming Conventions

2025-03-19T15:27:10Z

Sebastian1 moved page DQ500 DSG 7-speed transmission to 6-Speed Direct Shift Gearbox (DSG/0BH/0BT): Naming Conventions

← Older revision	Revision as of 15:27, 19 March 2025
(No difference)

Peter at 13:51, 13 March 2023

2023-03-13T13:51:33Z

← Older revision		Revision as of 13:51, 13 March 2023
Line 3:		Line 3:
	'''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry].		'''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry].
	Additional information can be found in the [[Official Factory Repair Information]] and sources such as [https://static.nhtsa.gov/odi/tsbs/2016/MC-10130218-9999.pdf SSP (Self-Study Program 950173)] and [https://static.nhtsa.gov/odi/tsbs/2018/MC-10159423-0001.pdf SSP (Self-Study Program 850183)].<br>		Additional information can be found in the [[Official Factory Repair Information]] and sources such as [https://static.nhtsa.gov/odi/tsbs/2016/MC-10130218-9999.pdf SSP (Self-Study Program 950173)] and [https://static.nhtsa.gov/odi/tsbs/2018/MC-10159423-0001.pdf SSP (Self-Study Program 850183)].<br>
	~~:ref: ''(0BT, 0BH, 0DE, 0GC)''~~
	<br>		<br>

Line 58:		Line 57:
	== Special Notes ==		== Special Notes ==

			* This Basic Settings procedure should also work for the following: '''0BT, 0BH, 0DE, 0GC''' ''(ref: DQ380, DQ381, DQ500 VAG Direct-shift gearboxes.)''
	* During the basic setting procedure, there maybe some loud gear shifting noises from the transmission, this is normal.		* During the basic setting procedure, there maybe some loud gear shifting noises from the transmission, this is normal.
	* If the Basic Settings fail, please email Ross-Tech with a complete Auto-Scan and the information found in the [Show Measuring Data] at the time of failure.		* If the Basic Settings fail, please email Ross-Tech with a complete Auto-Scan and the information found in the [Show Measuring Data] at the time of failure.

Peter at 13:40, 13 March 2023

2023-03-13T13:40:28Z

← Older revision		Revision as of 13:40, 13 March 2023
Line 3:		Line 3:
	'''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry].		'''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry].
	Additional information can be found in the [[Official Factory Repair Information]] and sources such as [https://static.nhtsa.gov/odi/tsbs/2016/MC-10130218-9999.pdf SSP (Self-Study Program 950173)] and [https://static.nhtsa.gov/odi/tsbs/2018/MC-10159423-0001.pdf SSP (Self-Study Program 850183)].<br>		Additional information can be found in the [[Official Factory Repair Information]] and sources such as [https://static.nhtsa.gov/odi/tsbs/2016/MC-10130218-9999.pdf SSP (Self-Study Program 950173)] and [https://static.nhtsa.gov/odi/tsbs/2018/MC-10159423-0001.pdf SSP (Self-Study Program 850183)].<br>
	:''(~~'''DQ500''' =~~ 0BT, 0BH, 0DE, 0GC)''		:ref: ''(0BT, 0BH, 0DE, 0GC)''
	<br>		<br>

Peter: Created page with "FORCETOC '''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry]. Additional..."

2023-03-10T19:46:56Z

Created page with "__FORCETOC__ '''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry]. Additional..."

New page

__FORCETOC__

'''General Information''' about the '''DQ500''' Transmission can be found in the [https://en.wikipedia.org/wiki/Direct-shift_gearbox Wikipedia entry].
Additional information can be found in the [[Official Factory Repair Information]] and sources such as [https://static.nhtsa.gov/odi/tsbs/2016/MC-10130218-9999.pdf SSP (Self-Study Program 950173)] and [https://static.nhtsa.gov/odi/tsbs/2018/MC-10159423-0001.pdf SSP (Self-Study Program 850183)]. 
:''('''DQ500''' = 0BT, 0BH, 0DE, 0GC)''
 

== Coding ==

* When replacing this Mechatronic unit, if the old Control Module is still accessible, prior to replacement read/copy it's Coding and Paste it into the New coding line of the replacement Module.''' 
* If the original Coding is unknown, coding information can sometimes be found in the pop-up balloon within the VCDS '''[[http://www.ross-tech.com/vcds/tour/recode_screen.html Coding-07]]''' function. 

== Basic Setting ==
'''Prerequisites:''' 
* Transmission fluid level is correct and temperature greater than 15°C ''(Do NOT continue if the temp is too low)''
* No fault codes other than '''P175F 00 [047] - Basic Settings Not Performed'''
* Advanced Measuring Values = [Control Module temperature]
* Selector lever in [P]
* Engine at idle speed, do not press accelerator pedal
* Parking brake and foot brake applied during the entire procedure 

'''Important!'''
:*''All Prerequisites must be adhered to'' 
:*''The brake pedal '''must''' be depressed during the entire procedure'' 
:*''Not all transmission controllers support this Basic Settings function'' 

=== DQ500 - Basic Settings Procedure ===

'''[Select] - [02 - Transmission]''' 
:'''[Basic Settings - UDS]''' 
:Select '''[Basic settings of transmission]''' ''(Do not press [Go!] yet!)''

Select the following '''[Show Measuring Data]''' values:
: [Engine speed]
: [Main status of abort code basic setting]
: [Status of basic setting]
: [Status of basic setting data for clutch]
: [Status of basic setting data; gear selector]
: [Sub-status of abort code basic setting]
Then press '''[Go!]'''

Display should read '''[Running]'''
: Wait for the '''[Finished correctly]'''
: Press '''[Done, Go Back]'''
: Check for fault codes.
: Close controller
: '''Important!''' Cycle the ignition '''Off''' and then Back '''On!''' 
::''(Failure to complete this last step will result in the inability to select any gear!)''

== Special Notes ==

* During the basic setting procedure, there maybe some loud gear shifting noises from the transmission, this is normal.
* If the Basic Settings fail, please email Ross-Tech with a complete Auto-Scan and the information found in the [Show Measuring Data] at the time of failure.
* Basic settings may not complete successfully if:
** The fluid temperature gets too hot.
** Brake is released

Additional Information and screen shots can be found on the Ross-Tech forum post ''(Thank you! AdvTechTS)'': 
:: https://forums.ross-tech.com/index.php?threads/36443/#post-305183

== Replacement ==

See the [[Official Factory Repair Information]] for the correct procedures.

[[Category:Transmissions]]