Audi A4 (8E) Comfort System - Revision history

Dana: /* Coding */

2014-11-10T15:40:30Z

Coding

← Older revision		Revision as of 15:40, 10 November 2014
Line 19:		Line 19:

	'''Note:''' ''Coding is the sum of the individual options. Not all options apply for all control modules!''		'''Note:''' ''Coding is the sum of the individual options. Not all options apply for all control modules!''
			* ''Registered customers can [mailto:Support@Ross-Tech.com contact us directly via email] for assistance. Every inquiry on this topic must include a full Auto-Scan as well as which parts have been replaced and why.''

	== Adaptation ==		== Adaptation ==

RtWiKiSyS0p at 22:05, 9 July 2012

2012-07-09T22:05:43Z

← Older revision		Revision as of 22:05, 9 July 2012
Line 48:		Line 48:
	=== Channel 061: Variant Reduction ===		=== Channel 061: Variant Reduction ===

	*+1 = Mechanical Window Regulators ~~in Rear~~ (PR-4R5)		* +1 = Rear Mechanical Window Regulators (PR-4R5) installed
	*+2 = Footwell Lights (PR-QQ1)		* +2 = Footwell Lights (PR-QQ1) installed
			* +4 = Fuel Tank Lid/Flap Release Button (PR-4K2/4K8) installed

	'''Note:''' ''Adaptation value is the sum of the individual options.''		'''Note:''' ''Adaptation value is the sum of the individual options.''
	* If the fuel door and tailgate/trunk are not operating properly after module replacement registered users can [mailto:Support@Ross-Tech.com email] us with a complete Auto-Scan for further assistance. <font color=white>E?ID=109242</font>

Dana at 13:22, 6 June 2012

2012-06-06T13:22:07Z

← Older revision		Revision as of 13:22, 6 June 2012
Line 43:		Line 43:
	'''[Close Controller, Go Back - 06]'''<br>		'''[Close Controller, Go Back - 06]'''<br>

	'''Notes:''' ''You can check the current memory positions using Meas. Block 007.'' ''If remotes are recognized but not functional see the [[#Remote Control Synchronization \| Remote Control Synchronization]] procedure.''<br>		'''Notes:''' ''You can check the current memory positions using Meas. Block 007.'' ''If remotes are recognized but not functional see the [[#Remote Control Synchronization \| Remote Control Synchronization]] procedure and [[#Special Notes \| Special Notes]] .''<br>


	=== Channel 061: Variant Reduction ===		=== Channel 061: Variant Reduction ===
Line 51:		Line 52:

	'''Note:''' ''Adaptation value is the sum of the individual options.''		'''Note:''' ''Adaptation value is the sum of the individual options.''
			* If the fuel door and tailgate/trunk are not operating properly after module replacement registered users can [mailto:Support@Ross-Tech.com email] us with a complete Auto-Scan for further assistance. <font color=white>E?ID=109242</font>

Jef: /* Special Notes */

2012-04-18T14:47:41Z

Special Notes

← Older revision		Revision as of 14:47, 18 April 2012
Line 85:		Line 85:
	* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:		* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
	** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''		** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''


			== Video Link ==

			2001 - 2008 A4 (8E/8H) Remote Learning

			[[File:8Eremote.jpg\|200px\|link=http://www.youtube.com/watch?v=o_DrT8W-_uQ]]

			http://www.youtube.com/watch?v=o_DrT8W-_uQ

Dana at 17:06, 16 December 2011

2011-12-16T17:06:22Z

← Older revision		Revision as of 17:06, 16 December 2011
Line 12:		Line 12:
	*+00256 = Avant		*+00256 = Avant
	*+00512 = Confirmation Close via Remote (1x Blink)		*+00512 = Confirmation Close via Remote (1x Blink)
	*+01024 = Confirmation Anti-Theft Warning ~~Sytem~~ Horn Activation		*+01024 = Confirmation Anti-Theft Warning System Horn Activation
	*+02048 = Door-/Window Regulator Logic		*+02048 = Door-/Window Regulator Logic
	*+04096 = Thatcham Anti-Theft Warning (not USA)		*+04096 = Thatcham Anti-Theft Warning (not USA)
Line 19:		Line 19:

	'''Note:''' ''Coding is the sum of the individual options. Not all options apply for all control modules!''		'''Note:''' ''Coding is the sum of the individual options. Not all options apply for all control modules!''


	== Adaptation ==		== Adaptation ==

			=== Channel 000: Remote Control Clearing ===

			This Adaptation Channel is used to clear all matched Remote Controls. This is often necessary prior to matching new remotes.


	=== Channel 021: Remote Control Matching ===		=== Channel 021: Remote Control Matching ===

Dana at 14:57, 12 May 2011

2011-05-12T14:57:45Z

← Older revision		Revision as of 14:57, 12 May 2011
Line 62:		Line 62:
	== Special Procedures ==		== Special Procedures ==
	=== Remote Control Synchronization ===		=== Remote Control Synchronization ===
	The 8E/8H platform Audi A4 is noted for losing remote control synchronization after low voltage conditions as ~~noted~~ in several TSBs. If the remotes are not functional after performing the [[#Channel 021: Remote Control Matching \| Remote Control Matching]] the following synchronization may be necessary:		The 8E/8H platform Audi A4 is noted for losing remote control synchronization after low voltage conditions as explained in several TSBs. If the remotes are not functional after performing the [[#Channel 021: Remote Control Matching \| Remote Control Matching]] the following synchronization may be necessary:

	* Press any button on remote control.<br>		* Press any button on remote control.<br>

Dana at 14:56, 12 May 2011

2011-05-12T14:56:50Z

← Older revision		Revision as of 14:56, 12 May 2011
Line 28:		Line 28:
	Channel 021.<br>		Channel 021.<br>
	'''[Read]'''<br>		'''[Read]'''<br>
	* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory ~~positon~~ 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].		* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
	'''[Test]'''<br>		'''[Test]'''<br>
	* Now press any button on the remote you want to match.		* Now press any button on the remote you want to match.
Line 36:		Line 36:
	'''[Close Controller, Go Back - 06]'''<br>		'''[Close Controller, Go Back - 06]'''<br>

	'''~~Note~~:''' ''You can check the current memory positions using Meas. Block 007.''		'''Notes:''' ''You can check the current memory positions using Meas. Block 007.'' ''If remotes are recognized but not functional see the [[#Remote Control Synchronization \| Remote Control Synchronization]] procedure.''<br>

	=== Channel 061: Variant Reduction ===		=== Channel 061: Variant Reduction ===
Line 60:		Line 60:


	=== Special Notes ===		== Special Procedures ==
			=== Remote Control Synchronization ===
			The 8E/8H platform Audi A4 is noted for losing remote control synchronization after low voltage conditions as noted in several TSBs. If the remotes are not functional after performing the [[#Channel 021: Remote Control Matching \| Remote Control Matching]] the following synchronization may be necessary:

			* Press any button on remote control.<br>
			''If vehicle does not respond by locking or unlocking:''<br>
			* Lock and unlock vehicle within 30 seconds using driver-side lock with the door closed.<br>
			* Open the door and insert the key in the ignition turning it to the On position.<br>
			* Remove the key from the ignition.<br>
			* Press any button on remote control.<br>
			* Now check function of synchronized remote control.<br>


			== Special Notes ==

	The 8E/8H platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.		The 8E/8H platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
	* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:		* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
	** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''		** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''

Andy: /* Channel 021: Remote Control Matching */

2011-02-25T17:57:11Z

Channel 021: Remote Control Matching

← Older revision		Revision as of 17:57, 25 February 2011
Line 24:		Line 24:

	'''[Select]'''<br>		'''[Select]'''<br>
	'''[46 - ~~Comfort System~~]'''<br>		'''[46 - Central Convenience]'''<br>
	'''[Adaptation - 10]'''<br>		'''[Adaptation - 10]'''<br>
	Channel 021.<br>		Channel 021.<br>

Dana at 17:41, 15 February 2011

2011-02-15T17:41:44Z

← Older revision		Revision as of 17:41, 15 February 2011
Line 58:		Line 58:

	'''Note:''' ''Adaptation value is the sum of the individual options.''		'''Note:''' ''Adaptation value is the sum of the individual options.''


			=== Special Notes ===

			The 8E/8H platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
			* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
			** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''

Andy: /* Channel 021: Remote Control Matching */

2010-06-30T18:26:51Z

Channel 021: Remote Control Matching

← Older revision		Revision as of 18:26, 30 June 2010
Line 28:		Line 28:
	Channel 021.<br>		Channel 021.<br>
	'''[Read]'''<br>		'''[Read]'''<br>
	* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory positon 3).		* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory positon 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
	'''[Test]'''<br>		'''[Test]'''<br>
	* Now press any button on the remote you want to match.		* Now press any button on the remote you want to match.
Line 37:		Line 37:

	'''Note:''' ''You can check the current memory positions using Meas. Block 007.''		'''Note:''' ''You can check the current memory positions using Meas. Block 007.''


	=== Channel 061: Variant Reduction ===		=== Channel 061: Variant Reduction ===