Audi A6 (4B) Central Locking - Revision history

Dana at 23:31, 13 July 2011

2011-07-13T23:31:44Z

← Older revision		Revision as of 23:31, 13 July 2011
Line 31:		Line 31:
	The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.		The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
	* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:		* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
	** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''		** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''<br>

			* If Adaptation Channel 21 is not available the control module does NOT support matching remotes with VCDS (or any scan tool). In those cases the remote matching procedure as per the Repair Manual and/or vehicle Owner's Manual will need to be completed.
			** In those cases, Measuring Block group 007 can still be used to verify the positions.

Jef: /* Channel 021: Remote Control Matching */

2011-04-08T21:41:49Z

Channel 021: Remote Control Matching

← Older revision		Revision as of 21:41, 8 April 2011
Line 13:		Line 13:

	'''[Select]'''<br>		'''[Select]'''<br>
	'''[35 - Centr Locks]'''<br>		'''[35 - Centr. Locks]'''<br>
	'''[Adaptation - 10]'''<br>		'''[Adaptation - 10]'''<br>
	Channel 021.<br>		Channel 021.<br>

Jef: /* Channel 021: Remote Control Matching */

2011-04-08T21:41:37Z

Channel 021: Remote Control Matching

← Older revision		Revision as of 21:41, 8 April 2011
Line 13:		Line 13:

	'''[Select]'''<br>		'''[Select]'''<br>
	'''[46 - ~~Comfort System~~]'''<br>		'''[35 - Centr Locks]'''<br>
	'''[Adaptation - 10]'''<br>		'''[Adaptation - 10]'''<br>
	Channel 021.<br>		Channel 021.<br>
Line 26:		Line 26:

	'''Note:''' ''You can check the current memory positions using Meas. Block 007.''		'''Note:''' ''You can check the current memory positions using Meas. Block 007.''


	=== Special Notes ===		=== Special Notes ===

Dana at 16:18, 18 February 2011

2011-02-18T16:18:52Z

← Older revision		Revision as of 16:18, 18 February 2011
Line 3:		Line 3:
	== Coding ==		== Coding ==

	VCDS will display a coding chart a pop-up balloon while connected to the vehicle.		VCDS will display a coding chart a pop-up balloon while connected to the vehicle.<br>
			''Add the sum of the options to configure the correct coding.''<br>


Line 16:		Line 17:
	Channel 021.<br>		Channel 021.<br>
	'''[Read]'''<br>		'''[Read]'''<br>
	* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory ~~positon~~ 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].		* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
	'''[Test]'''<br>		'''[Test]'''<br>
	* Now press any button on the remote you want to match.		* Now press any button on the remote you want to match.

Dana: Created page with 'FORCETOC == Coding == VCDS will display a coding chart a pop-up balloon while connected to the vehicle. == Adaptation == === Channel 021: Remote Control Matching === …'

2011-02-18T16:12:55Z

Created page with '__FORCETOC__ == Coding == VCDS will display a coding chart a pop-up balloon while connected to the vehicle. == Adaptation == === Channel 021: Remote Control Matching === …'

New page

__FORCETOC__

== Coding ==

VCDS will display a coding chart a pop-up balloon while connected to the vehicle.

== Adaptation ==

=== Channel 021: Remote Control Matching ===

'''[Select]''' 
'''[46 - Comfort System]''' 
'''[Adaptation - 10]''' 
Channel 021. 
'''[Read]''' 
* Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory positon 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
'''[Test]''' 
* Now press any button on the remote you want to match.
* The meas. block field above will change from ''Not Recogn.'' to ''Recognized''.
'''[Save]''' 
'''[Done, Go Back]''' 
'''[Close Controller, Go Back - 06]''' 

'''Note:''' ''You can check the current memory positions using Meas. Block 007.''

=== Special Notes ===

The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''

Audi A6 (4B) Central Locking - Revision history

Dana at 23:31, 13 July 2011

Jef: /* Channel 021: Remote Control Matching */

Jef: /* Channel 021: Remote Control Matching */

Dana at 16:18, 18 February 2011

Dana: Created page with '__FORCETOC__ == Coding == VCDS will display a coding chart a pop-up balloon while connected to the vehicle. == Adaptation == === Channel 021: Remote Control Matching === …'

Dana: Created page with 'FORCETOC == Coding == VCDS will display a coding chart a pop-up balloon while connected to the vehicle. == Adaptation == === Channel 021: Remote Control Matching === …'