Peter: Created page with "FORCETOC == B2012 - Data Set Implausible == ==== Possible Causes ==== * Control module was replaced ==== Possible Solutions ==== * An online connection with the manufa..."

2019-09-19T15:26:00Z

Created page with "__FORCETOC__ == B2012 - Data Set Implausible == ==== Possible Causes ==== * Control module was replaced ==== Possible Solutions ==== * An online connection with the manufa..."

New page

__FORCETOC__
== B2012 - Data Set Implausible ==

==== Possible Causes ====

* Control module was replaced

==== Possible Solutions ====

* An online connection with the manufacture is required for Parameterization via the SVM (Software Version Management).

==== Special Notes ====

* Parameterization refers to data written into the control unit by the SVM function (Software Version Management) to customize the software functionality for the specific vehicle or country of operation.

* Often referred to as the “calibration data”, it is necessary Parameterization is performed anytime there is missing or invalid data-set fault codes and/or it is suggested by SVM test plan to ensure the proper functionality of the control unit.
* Not all control units are parameterized by SVM.
* Parameterization MUST BE PERFORMED to ensure the control unit will function properly in the vehicle!

[[Category:Fault Codes]]

B2012 - Revision history

Peter: Created page with "__FORCETOC__ == B2012 - Data Set Implausible == ==== Possible Causes ==== * Control module was replaced ==== Possible Solutions ==== * An online connection with the manufa..."

Peter: Created page with "FORCETOC == B2012 - Data Set Implausible == ==== Possible Causes ==== * Control module was replaced ==== Possible Solutions ==== * An online connection with the manufa..."