Brake Electronics (Bosch 5.3 ABS/EDS/ASR) - Revision history

Dana at 16:24, 27 October 2011

2011-10-27T16:24:42Z

← Older revision		Revision as of 16:24, 27 October 2011
Line 18:		Line 18:

	* CAN-Databus is the internal communication between the CAN Gateway and other modules on the powertrain bus. Most of the early production vehicles using a throttle cable engine management system do not have CAN-Databus.		* CAN-Databus is the internal communication between the CAN Gateway and other modules on the powertrain bus. Most of the early production vehicles using a throttle cable engine management system do not have CAN-Databus.
	*# VW models such as the (3B) Passat typically use the addresses 17-Instruments and 19-CAN Gateway on models with CAN-Databus.		*#''' VW models''' such as the (3B) Passat typically use the addresses 17-Instruments and 19-CAN Gateway on models with CAN-Databus.
	*# Audi models such as the (8D) A4 do NOT use a 19-CAN Gateway, instead all internal communication is handled by the 17-Instrument cluster when applicable.		*# '''Audi models''' such as the (8D) A4 and (4B) A6 do NOT use a 19-CAN Gateway, instead all internal communication is handled by the 17-Instrument cluster when applicable.
	** The presence of internal CAN-Databus can be determined by checking the wiring diagrams however measuring block groups 125 and up in the 17-Instrument cluster will also show this information if the vehicle is equipped. If groups 125 and up are not available the vehicle should not have CAN-Databus.		** The presence of internal CAN-Databus can be determined by checking the wiring diagrams however measuring block groups 125 and up in the 17-Instrument cluster will also show this information if the vehicle is equipped. If groups 125 and up are not available the vehicle should not have CAN-Databus.
			** If other modules in the vehicle have ''Powertrain Data Bus: Missing Message from ABS Controller'' fault codes the vehicle has CAN-Databus.

Dana at 20:24, 13 October 2011

2011-10-13T20:24:47Z

← Older revision		Revision as of 20:24, 13 October 2011
Line 13:		Line 13:
	**3 = Multitronic (01J) ''(with CAN-Databus)''		**3 = Multitronic (01J) ''(with CAN-Databus)''
	**3 = Automatic Transmission (01V) ''(without CAN-Databus)''		**3 = Automatic Transmission (01V) ''(without CAN-Databus)''


			==== Special Notes ====

			* CAN-Databus is the internal communication between the CAN Gateway and other modules on the powertrain bus. Most of the early production vehicles using a throttle cable engine management system do not have CAN-Databus.
			*# VW models such as the (3B) Passat typically use the addresses 17-Instruments and 19-CAN Gateway on models with CAN-Databus.
			*# Audi models such as the (8D) A4 do NOT use a 19-CAN Gateway, instead all internal communication is handled by the 17-Instrument cluster when applicable.
			** The presence of internal CAN-Databus can be determined by checking the wiring diagrams however measuring block groups 125 and up in the 17-Instrument cluster will also show this information if the vehicle is equipped. If groups 125 and up are not available the vehicle should not have CAN-Databus.

RtWiKiSyS0p: Audi A4 (8D) Brake Electronics (Bosch 5.3 ABS/EDS/ASR) moved to Brake Electronics (Bosch 5.3 ABS/EDS/ASR)

2006-10-11T13:12:47Z

Audi A4 (8D) Brake Electronics (Bosch 5.3 ABS/EDS/ASR) moved to Brake Electronics (Bosch 5.3 ABS/EDS/ASR)

← Older revision		Revision as of 13:12, 11 October 2006
(No difference)

RtWiKiSyS0p at 14:04, 27 September 2006

2006-09-27T14:04:36Z

← Older revision		Revision as of 14:04, 27 September 2006
Line 3:		Line 3:

	*'''000?x''': ''Engine''		*'''000?x''': ''Engine''
	**0 = Gasoline Engine 2.4l-2.8l (without CAN-Databus)		**0 = Gasoline Engine 2.4l-2.8l ''(without CAN-Databus)''
	**1 = Diesel Engine		**1 = Diesel Engine
	**2 = Gasoline Engine 1.8T		**2 = Gasoline Engine 1.8T
	**3 = Gasoline Engine 2.4l-2.8l (with CAN-Databus)		**3 = Gasoline Engine 2.4l-2.8l ''(with CAN-Databus)''
	*'''000x?''': ''Transmission''		*'''000x?''': ''Transmission''
	**0 = Manual Transmission (012) (without CAN-Databus)		**0 = Manual Transmission (012) ''(without CAN-Databus)''
	**1 = Automatic Transmission (01V) (with CAN-Databus)		**1 = Automatic Transmission (01V) ''(with CAN-Databus)''
	**2 = Manual Transmission (01E) (with CAN-Databus)		**2 = Manual Transmission (01E) ''(with CAN-Databus)''
	**3 = Multitronic (01J) (with CAN-Databus)		**3 = Multitronic (01J) ''(with CAN-Databus)''
	**3 = Automatic Transmission (01V) (without CAN-Databus)		**3 = Automatic Transmission (01V) ''(without CAN-Databus)''

RtWiKiSyS0p at 14:04, 27 September 2006

2006-09-27T14:04:01Z

New page

__FORCETOC__
== Coding ==

*'''000?x''': ''Engine''
**0 = Gasoline Engine 2.4l-2.8l (without CAN-Databus)
**1 = Diesel Engine
**2 = Gasoline Engine 1.8T
**3 = Gasoline Engine 2.4l-2.8l (with CAN-Databus)
*'''000x?''': ''Transmission''
**0 = Manual Transmission (012) (without CAN-Databus)
**1 = Automatic Transmission (01V) (with CAN-Databus)
**2 = Manual Transmission (01E) (with CAN-Databus)
**3 = Multitronic (01J) (with CAN-Databus)
**3 = Automatic Transmission (01V) (without CAN-Databus)