Cruise Control Retrofitting (1K) - Revision history

Dana at 15:34, 18 July 2017

2017-07-18T15:34:37Z

← Older revision		Revision as of 15:34, 18 July 2017
Line 2:		Line 2:
	=== Steering Column Control Module ===		=== Steering Column Control Module ===

	There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions\|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may [http://~~www~~.ross-tech.com/~~contact~~.~~html contact us~~] to ask for help with this topic.''		There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions\|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may join and post in the [http://forums.ross-tech.com/forumdisplay.php?10-Retrofits Retrofits] section of our [http://forums.ross-tech.com Forum] to ask for help with this topic.''


Line 29:		Line 29:


	'''''If you are having trouble finding/calculating the proper Coding using the Long Coding Assist [http://ross-tech.com/~~contact~~.~~html please Contact us directly~~].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''		'''''If you are having trouble finding/calculating the proper Coding using the Long Coding Assist please post in the [http://forums.ross-tech.com/forumdisplay.php?10-Retrofits Retrofits] section of our [http://forums.ross-tech.com Forum].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''


	'''Also see this page for an explanation of CCS activation:''' [[Checking Cruise Control using Measuring Values]]		'''Also see this page for an explanation of CCS activation:''' [[Checking Cruise Control using Measuring Values]]

Dana at 18:20, 5 October 2011

2011-10-05T18:20:50Z

← Older revision		Revision as of 18:20, 5 October 2011
Line 25:		Line 25:
	* '''Update the Engine Control Module (J623 / #01) Coding.'''		* '''Update the Engine Control Module (J623 / #01) Coding.'''
	** Make sure that the '''Engine is NOT running''', otherwise the new Coding will be rejected. Models equipped with Start/Stop System do have a Shutoff Switch/Button which will deactivate the Start/Stop Function.		** Make sure that the '''Engine is NOT running''', otherwise the new Coding will be rejected. Models equipped with Start/Stop System do have a Shutoff Switch/Button which will deactivate the Start/Stop Function.
	** As a Rule of Thumb, if the Engine Control Module uses a Short Coding the Activation is being done using Coding-II. If the Engine Control Module uses a Long Coding the Activation is done in (Long) Coding itself. Please also note that there are different Coding Variants for Long Coding.		** As a Rule of Thumb, if the Engine Control Module uses a Short Coding the Activation is being done using [[Checking Cruise Control using Measuring Values#Cruise Control Activation \| Coding-II]]. If the Engine Control Module uses a Long Coding the Activation is done in (Long) Coding itself. Please also note that there are different Coding Variants for Long Coding.
	** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''		** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''

RtWiKiSyS0p at 22:41, 17 August 2011

2011-08-17T22:41:15Z

← Older revision		Revision as of 22:41, 17 August 2011
Line 15:		Line 15:
	* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.		* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.
	* Add the Wiring from Steering Column Control Module to the Engine Control Module. ''This step used to be necessary before MY 2006/2007 but as of MY 2010 several Users have reported missing Wiring when the Vehicle was not Factory equipped with Cruise Control. Check the proper Wiring Diagrams for the Vehicle in question.''		* Add the Wiring from Steering Column Control Module to the Engine Control Module. ''This step used to be necessary before MY 2006/2007 but as of MY 2010 several Users have reported missing Wiring when the Vehicle was not Factory equipped with Cruise Control. Check the proper Wiring Diagrams for the Vehicle in question.''
	** For Steering Wheel Control Module P/N 1K0-953-549-* check Connector/Pin ~~T16~~/5.		** For Steering Wheel Control Module P/N 1K0-953-549-* check Connector/Pin T20/13.
	** For Steering Wheel Control Module P/N 5K0-953-549-* and 5K0-953-569-* check Connector/Pin ~~T20~~/13.		** For Steering Wheel Control Module P/N 5K0-953-549-* and 5K0-953-569-* check Connector/Pin T16/5.

RtWiKiSyS0p at 22:31, 17 August 2011

2011-08-17T22:31:00Z

← Older revision		Revision as of 22:31, 17 August 2011
Line 14:		Line 14:
	* Install proper Cruise Control Switch/Lever		* Install proper Cruise Control Switch/Lever
	* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.		* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.
	* Add the Wiring from Steering Column Control Module to the Engine Control Module. ''This step used to be necessary before MY 2006/2007 but as of MY 2010 several ~~users~~ have reported missing ~~wiring~~ when the ~~vehicle~~ was not ~~factory~~ equipped with ~~CCS~~. Check the proper ~~wiring diagrams~~ for the ~~vehicle~~ in question.''		* Add the Wiring from Steering Column Control Module to the Engine Control Module. ''This step used to be necessary before MY 2006/2007 but as of MY 2010 several Users have reported missing Wiring when the Vehicle was not Factory equipped with Cruise Control. Check the proper Wiring Diagrams for the Vehicle in question.''
	** For Steering Wheel Control Module P/N 1K0-953-549-* check Connector/Pin T16/5.		** For Steering Wheel Control Module P/N 1K0-953-549-* check Connector/Pin T16/5.
	** For Steering Wheel Control Module P/N 5K0-953-549-* and 5K0-953-569-* check Connector/Pin T20/13.		** For Steering Wheel Control Module P/N 5K0-953-549-* and 5K0-953-569-* check Connector/Pin T20/13.

RtWiKiSyS0p at 22:30, 17 August 2011

2011-08-17T22:30:18Z

← Older revision		Revision as of 22:30, 17 August 2011
Line 14:		Line 14:
	* Install proper Cruise Control Switch/Lever		* Install proper Cruise Control Switch/Lever
	* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.		* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.
	* Add the Wiring from Steering Column Control Module to the Engine Control Module.		* Add the Wiring from Steering Column Control Module to the Engine Control Module. ''This step used to be necessary before MY 2006/2007 but as of MY 2010 several users have reported missing wiring when the vehicle was not factory equipped with CCS. Check the proper wiring diagrams for the vehicle in question.''
	** This step ~~was usually only~~ necessary ~~if the Car is older than~~ MY 2006/2007 ~~however~~ several ~~2010 + vehicles~~ have reported missing wiring when the vehicle was not factory equipped with CCS. Check the proper wiring diagrams for the vehicle in question.		** For Steering Wheel Control Module P/N 1K0-953-549-* check Connector/Pin T16/5.
			** For Steering Wheel Control Module P/N 5K0-953-549-* and 5K0-953-569-* check Connector/Pin T20/13.

Dana at 22:20, 17 August 2011

2011-08-17T22:20:09Z

← Older revision		Revision as of 22:20, 17 August 2011
Line 14:		Line 14:
	* Install proper Cruise Control Switch/Lever		* Install proper Cruise Control Switch/Lever
	* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.		* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.
	* Add the Wiring from Steering Column Control Module to the Engine Control Module~~, this~~ step is usually only necessary if the Car is older than MY 2006/2007.		* Add the Wiring from Steering Column Control Module to the Engine Control Module.
			** This step was usually only necessary if the Car is older than MY 2006/2007 however several 2010 + vehicles have reported missing wiring when the vehicle was not factory equipped with CCS. Check the proper wiring diagrams for the vehicle in question.

Dana at 14:33, 25 July 2011

2011-07-25T14:33:13Z

← Older revision		Revision as of 14:33, 25 July 2011
Line 28:		Line 28:

	'''''If you are having trouble finding/calculating the proper Coding using the Long Coding Assist [http://ross-tech.com/contact.html please Contact us directly].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''		'''''If you are having trouble finding/calculating the proper Coding using the Long Coding Assist [http://ross-tech.com/contact.html please Contact us directly].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''


			'''Also see this page for an explanation of CCS activation:''' [[Checking Cruise Control using Measuring Values]]

RtWiKiSyS0p at 18:49, 16 March 2011

2011-03-16T18:49:41Z

← Older revision		Revision as of 18:49, 16 March 2011
Line 1:		Line 1:
	~~__FORCETOC__~~

	== Requirements ==		== Requirements ==
	=== Steering Column Control Module ===		=== Steering Column Control Module ===
Line 8:		Line 6:

	* [[Steering Wheel Control Module Versions\|Steering Wheel Control Module Variants]]		* [[Steering Wheel Control Module Versions\|Steering Wheel Control Module Variants]]


	== Installation & Wiring ==		== Installation & Wiring ==

			Additional Information can be found in the Repair Manuals, the Wiring Diagrams, the Parts Catalog and/or the Instructions included in the Retrofitting Kit.

	* Install proper Cruise Control Switch/Lever		* Install proper Cruise Control Switch/Lever
	* Add the Wiring from Steering Column Control Module to the Engine Control Module ~~(may not be~~ necessary ~~in all cases)~~		* If necessary Replace the Steering Column Control Module (J527), see Requirements above for Details.
			* Add the Wiring from Steering Column Control Module to the Engine Control Module, this step is usually only necessary if the Car is older than MY 2006/2007.

	~~Additional Information can be found in~~ the ~~Repair Manuals, the Wiring Diagrams, the Parts Catalog and~~/~~or the Instructions included in the Retrofitting Kit~~.

RtWiKiSyS0p at 18:46, 16 March 2011

2011-03-16T18:46:57Z

← Older revision		Revision as of 18:46, 16 March 2011
Line 5:		Line 5:

	There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions\|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may [http://www.ross-tech.com/contact.html contact us] to ask for help with this topic.''		There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions\|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may [http://www.ross-tech.com/contact.html contact us] to ask for help with this topic.''


	* [[Steering Wheel Control Module Versions\|Steering Wheel Control Module Variants]]		* [[Steering Wheel Control Module Versions\|Steering Wheel Control Module Variants]]
Line 10:		Line 11:
	== Installation & Wiring ==		== Installation & Wiring ==

	~~In general~~ the ~~whole retrofit is just plug and play except that one wire~~ may ~~need to~~ be ~~added~~.~~<br>~~		* Install proper Cruise Control Switch/Lever
			* Add the Wiring from Steering Column Control Module to the Engine Control Module (may not be necessary in all cases)


			Additional Information can be found in the Repair Manuals, the Wiring Diagrams, the Parts Catalog and/or the Instructions included in the Retrofitting Kit.


	* Wire T20d/13 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).		== Configuration ==
	* Install Cruise Control capable Lever (see Parts Catalog/Repair Manual for details).

			* '''Update Steering Column Control Module (J527 / #16) Coding.'''
			** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be shown once you access the Coding Function using VCDS.''
			* '''Update the Engine Control Module (J623 / #01) Coding.'''
			** Make sure that the '''Engine is NOT running''', otherwise the new Coding will be rejected. Models equipped with Start/Stop System do have a Shutoff Switch/Button which will deactivate the Start/Stop Function.
			** As a Rule of Thumb, if the Engine Control Module uses a Short Coding the Activation is being done using Coding-II. If the Engine Control Module uses a Long Coding the Activation is done in (Long) Coding itself. Please also note that there are different Coding Variants for Long Coding.
			** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''

	~~== Activating Cruise Control ==~~

	* Change [[VW Golf (1K) Steering Wheel#Coding\|Steering Column Control Module Coding]].		'''''If you are having trouble finding/calculating the proper Coding using the Long Coding Assist [http://ross-tech.com/contact.html please Contact us directly].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''
	* Activate Cruise Control in the ~~Engine Control Module.~~
	** See [[:Category:Engines\|Engine specific Diagnostic Procedures]]. As a Rule of Thumb, if the Engine Control Module uses a Short Coding ~~the Activation is being done~~ using ~~Coding-II. If~~ the ~~Engine Control Module uses a~~ Long Coding ~~the Activation is done in (Long) Coding itself. Please also note that there are different Coding Variants for Long Coding. ''If VCDS does not provide you with Coding Details/Suggestions please~~ [http://~~www.~~ross-tech.com/contact.html ~~contact~~ us] to ~~ask for help with this topic~~.''

RtWiKiSyS0p at 09:06, 5 July 2010

2010-07-05T09:06:37Z

← Older revision		Revision as of 09:06, 5 July 2010
Line 6:		Line 6:
	There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions\|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may [http://www.ross-tech.com/contact.html contact us] to ask for help with this topic.''		There are different types of steering column control modules, the type is depending on several individual options so we have compiled [[VW Golf (1K) Steering Wheel Versions\|a list of available part numbers]] for you. ''If a part number is not listed, registered VCDS users may [http://www.ross-tech.com/contact.html contact us] to ask for help with this topic.''

	* [[~~VW Golf (1K)~~ Steering Wheel Versions\|Steering Wheel Control Module Variants]]		* [[Steering Wheel Control Module Versions\|Steering Wheel Control Module Variants]]

	== Installation & Wiring ==		== Installation & Wiring ==