Immobilizer II Key Matching (Separate) - Revision history

Jef: /* Key Matching */

2012-07-12T21:25:40Z

Key Matching

← Older revision		Revision as of 21:25, 12 July 2012
Line 29:		Line 29:

	'''[Login - 11]'''<br>		'''[Login - 11]'''<br>
	~~''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''~~
	* '''4-digit PIN'''		* '''4-digit PIN'''
	** Enter zero followed by the 4-digit PIN. ''For example, if your PIN is 1234, enter 01234.''		** Enter zero followed by the 4-digit PIN. ''For example, if your PIN is 1234, enter 01234.''
	* '''7-digit PIN'''
	** '''[Use 7-digit PIN/SKC]'''
	** Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
	** '''[OK]'''
	** VCDS will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
	'''[Do it!]'''<br>		'''[Do it!]'''<br>

Peter: /* Key Matching */

2012-06-07T15:34:31Z

Key Matching

← Older revision		Revision as of 15:34, 7 June 2012
Line 45:		Line 45:
	''The "Stored Value" is the number of keys currently matched.''<br>		''The "Stored Value" is the number of keys currently matched.''<br>
	Enter a "new value" corresponding to the total number of keys to be matched, including any existing keys.<br>		Enter a "new value" corresponding to the total number of keys to be matched, including any existing keys.<br>
	''The old keys are automatically ~~beeing~~ cleared.''<br>		''The old keys are automatically being cleared.''<br>
	'''[Save]'''<br>		'''[Save]'''<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>

Andy at 21:09, 18 March 2011

2011-03-18T21:09:52Z

← Older revision		Revision as of 21:09, 18 March 2011
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
	'''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo box. See the separate instructions for models where the [[Immobilizer II Key Matching (Cluster)\|immobilizer control module is integrated in instrument cluster]].'''		'''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo box. See the separate instructions for models where the [[Immobilizer II Key Matching (Cluster)\|immobilizer control module is integrated in instrument cluster]]. For help determining which Immobilizer system is in each vehicle and for applicable procedures for other types of Immobilizer, go to the general [[Immobilizer]] page.'''''

	== Determining IMMO-ID ==		== Determining IMMO-ID ==
Line 36:		Line 36:
	** Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.		** Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
	** '''[OK]'''		** '''[OK]'''
	** ~~VAG-COM~~ will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".		** VCDS will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
	'''[Do it!]'''<br>		'''[Do it!]'''<br>

RtWiKiSyS0p at 13:31, 25 June 2008

2008-06-25T13:31:35Z

← Older revision		Revision as of 13:31, 25 June 2008
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
	'''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo box. See the ~~seperate~~ instructions for models where the [[Immobilizer II Key Matching (Cluster)\|immobilizer control module is integrated in instrument cluster]].'''		'''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo box. See the separate instructions for models where the [[Immobilizer II Key Matching (Cluster)\|immobilizer control module is integrated in instrument cluster]].'''

	== Determining IMMO-ID ==		== Determining IMMO-ID ==

RtWiKiSyS0p at 16:13, 26 January 2008

2008-01-26T16:13:13Z

← Older revision		Revision as of 16:13, 26 January 2008
Line 24:		Line 24:
	'''[Go!]'''<br>		'''[Go!]'''<br>
	''The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.''<br>		''The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.''<br>
	''You can check each key in this manner.''		''You can check each key in this manner.''<br>


	~~Select Block 003.~~<br>
	~~'''[Go!]'''<br>~~
	~~''Make sure the shown lock times in field 1, 2 and 3 are '''0''' (each field represents a time in minutes).''<br>~~
	* ''If the lock times are NOT '''0''':''
	** ''Do NOT switch off the ignition!''
	** ''Allow the car to sit for AT LEAST the number of minutes that were indicated by the fields 1-3.''
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>

RtWiKiSyS0p: New page: FORCETOC '''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo ...

2008-01-26T16:12:22Z

New page: __FORCETOC__ '''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo ...

New page

__FORCETOC__
'''This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with with Immobilizer II, where the immobilizer control module is integrated in a separate immo box. See the seperate instructions for models where the [[Immobilizer II Key Matching (Cluster)|immobilizer control module is integrated in instrument cluster]].'''

== Determining IMMO-ID ==

'''[Select]''' 
'''[25 - Immobilizer]''' 
Look at the "Component" field. The 14-digit string in the Immo-ID. 
'''[Close Controller, Go Back - 06]''' 

== Key Matching ==

'''Prerequisites:''' 
* You can match up to 8 keys.
* While adapting each key, make sure to place the other keys away from the ignition lock (reader coil). ''The passenger seat is an adequate place.''
* Battery voltage at least 12.0 V. 

'''[Select]''' 
'''[25 - Immobilizer]''' 
'''[Meas. Blocks - 08]''' 
Select Block 001. 
'''[Go!]''' 
''The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.'' 
''You can check each key in this manner.''

Select Block 003. 
'''[Go!]''' 
''Make sure the shown lock times in field 1, 2 and 3 are '''0''' (each field represents a time in minutes).'' 
* ''If the lock times are NOT '''0''':''
** ''Do NOT switch off the ignition!''
** ''Allow the car to sit for AT LEAST the number of minutes that were indicated by the fields 1-3.''
'''[Done, Go Back]''' 

'''[Login - 11]''' 
''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''
* '''4-digit PIN'''
** Enter zero followed by the 4-digit PIN. ''For example, if your PIN is 1234, enter 01234.''
* '''7-digit PIN'''
** '''[Use 7-digit PIN/SKC]'''
** Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
** '''[OK]'''
** VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
'''[Do it!]''' 

'''[Adaptation - 10]''' 
Enter 01 in "Channel Number" (if not available use Channel 21). 
'''[Read]''' 
''The "Stored Value" is the number of keys currently matched.'' 
Enter a "new value" corresponding to the total number of keys to be matched, including any existing keys. 
''The old keys are automatically beeing cleared.'' 
'''[Save]''' 
'''[Done, Go Back]''' 
'''[Close Controller, Go Back - 06]''' 

* ''Repeat the following steps until all keys have been matched:'' 
**''Switch ignition off and remove key.'' 
**''Insert next key to ignition and switch ignition on again.'' 
**''The warning light for the Immobilizer will light up for ~2 seconds, then go out Switch ignition off and remove key.'' 

'''Note:''' ''The above steps after saving the adaptation, should not exceed 30/60 seconds!''