Peter: Created page with "== Coding == '''Coding is typically performed using Software Version Management (SVM) with an online connection to the manufacture. '''If the old Control Module is still ac..."

2021-10-14T20:19:27Z

Created page with "== Coding == '''Coding is typically performed using Software Version Management (SVM) with an online connection to the manufacture. '''If the old Control Module is still ac..."

New page

== Coding ==

'''Coding is typically performed using Software Version Management (SVM) with an online connection to the manufacture.

'''If the old Control Module is still accessible, read/copy/save it's Coding to the new Module.

''In case this is not possible please [http://www.ross-tech.com/contact.html contact us directly] and we can try to assist you with the Coding Process.

''Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.'' 

== Basic Setting ==
=== Sensor for Steering Angle (G85) ===

'''[Select]''' 
'''[03 - ABS Brakes]''' 

'''[Fault Codes - 02]''' 
'''[Done, Go Back]''' 

Start Engine (session still running). 

Turn steering wheel at least 30 ° left and back straight ahead. 

'''[Meas. Blocks - 08]''' 
Group 005 Field 1 (Steering Angle Sensor -G85-) 
Specification: 0.0 ° 
Tolerance (when straight): ±5.0 ° 
'''[Done, Go Back]''' 

'''[Security Access - 16]''' 
Enter 40168 
'''[Do It!]''' 

'''[Basic Settings - 04]''' 
Group 001 
'''[Go!]''' 
'''[Done, Go Back]''' 

'''[Fault Codes - 02]''' 
All fault codes should have disappeared. 
'''[Done, Go Back]''' 

'''[Close Controller, Go Back - 06]''' 

=== ESP-Sensor Unit (G419) ===

'''[Select]''' 
'''[03 - ABS Brakes]''' 

'''[Security Access - 16]''' 
Enter 40168 
'''[Do It!]''' 

'''[Basic Settings - 04]''' 
Group 069 
'''[Go!]''' 
Field 2 should show '''OK''' after a successful Calibration. 
'''[Done, Go Back]''' 

'''[Meas. Blocks - 08]''' 
Group 010 Field 1/2 (Longitudinal Acceleration Sensor (G251)) 
Specification: ±1.25 m/s² 
'''[Done, Go Back]''' 

'''[Fault Codes - 02]''' 
All fault codes should have disappeared. 
'''[Done, Go Back]''' 

'''[Close Controller, Go Back - 06]'''

Lamborghini Gallardo Brake Electronics (Bosch 8.1) - Revision history

Peter: Created page with "== Coding == '''Coding is typically performed using Software Version Management (SVM) with an online connection to the manufacture. '''If the old Control Module is still ac..."