P106B/004203 - Revision history

RtWiKiSyS0p at 15:43, 30 March 2012

2012-03-30T15:43:39Z

← Older revision		Revision as of 15:43, 30 March 2012
Line 20:		Line 20:
	==== Special Notes ====		==== Special Notes ====

	* When found on 4.2l CR-TDI (BVN), the Learning Values have to be cleared after replacing the Throttle Body Control Module.		* When found on 3.0l CR-TDI (i.e. BKS/BUG) or 4.2l CR-TDI (BVN), the Learning Values have to be cleared after replacing the Throttle Body Control Module.
	**'''DO NOT CLEAR LEARNED VALUES IF YOU HAVE NOT REPLACED THE THROTTLE BODY CONTROL MODULE!''' Otherwise the proper values are being cleared and incorrect values are being learned.		**'''DO NOT CLEAR LEARNED VALUES IF YOU HAVE NOT REPLACED THE THROTTLE BODY CONTROL MODULE!''' Otherwise the proper values are being cleared and incorrect values are being learned.

RtWiKiSyS0p at 14:31, 28 April 2008

2008-04-28T14:31:34Z

← Older revision		Revision as of 14:31, 28 April 2008
Line 24:		Line 24:

	'''[Select]'''<br>		'''[Select]'''<br>
	'''[01 - Engine]''' (for Bank 1/J388) or '''11 - Engine 2''' (for Bank 2/J544)<br>		'''[01 - Engine]''' (for Bank 1/J388) or '''[11 - Engine 2]''' (for Bank 2/J544)<br>

	'''[Coding-II - 11]'''<br>		'''[Coding-II - 11]'''<br>

RtWiKiSyS0p at 14:31, 28 April 2008

2008-04-28T14:31:15Z

← Older revision		Revision as of 14:31, 28 April 2008
Line 30:		Line 30:
	'''[Do It!]'''<br>		'''[Do It!]'''<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>
	'''[Close Controller, Go Back - 06]'''~~<br>~~<br>		'''[Close Controller, Go Back - 06]'''<br>
	* Switch the Ignition OFF.		* Switch the Ignition OFF.
	* Switch the Ignition ON for 1 Second, then turn it OFF immediately.		* Switch the Ignition ON for 1 Second, then turn it OFF immediately.

RtWiKiSyS0p at 14:29, 28 April 2008

2008-04-28T14:29:44Z

← Older revision		Revision as of 14:29, 28 April 2008
Line 20:		Line 20:
	==== Special Notes ====		==== Special Notes ====

	* When found on 4.2l CR-TDI (BVN), the Learning Values have to be cleared after replacing the Throttle Body Control Module. '''DO NOT CLEAR LEARNED VALUES IF YOU HAVE NOT REPLACED THE THROTTLE BODY CONTROL MODULE!''' Otherwise the proper values are being cleared and incorrect values are being learned.		* When found on 4.2l CR-TDI (BVN), the Learning Values have to be cleared after replacing the Throttle Body Control Module.
			**'''DO NOT CLEAR LEARNED VALUES IF YOU HAVE NOT REPLACED THE THROTTLE BODY CONTROL MODULE!''' Otherwise the proper values are being cleared and incorrect values are being learned.

	'''[Select]'''<br>		'''[Select]'''<br>

RtWiKiSyS0p: New page: FORCETOC == P106B/004203 - Throttle Valve: Stuck or difficult to move == ==== Possible Symptoms ==== * Malfunction Indicator Lamp (MIL) active ==== Possible Causes ==== * Wiring/Co...

2008-04-28T14:29:23Z

New page: __FORCETOC__ == P106B/004203 - Throttle Valve: Stuck or difficult to move == ==== Possible Symptoms ==== * Malfunction Indicator Lamp (MIL) active ==== Possible Causes ==== * Wiring/Co...

New page

__FORCETOC__
== P106B/004203 - Throttle Valve: Stuck or difficult to move ==

==== Possible Symptoms ====

* Malfunction Indicator Lamp (MIL) active

==== Possible Causes ====

* Wiring/Connectors from/to Throttle Body Control Module to Engine Control Module faulty
* Throttle Body Control Module Damaged and/or Moving Difficulties

==== Possible Solutions ====

* Check Wiring/Connectors from/to Throttle Body Control Module to Engine Control Module
** Check for properly attached Connectors, twisted Pins, loose Contact, Corrosion and Water Ingress
* Check Throttle Body Control Module for Damage and Moving Difficulties
* Perform (Selective) Output Test

==== Special Notes ====

* When found on 4.2l CR-TDI (BVN), the Learning Values have to be cleared after replacing the Throttle Body Control Module. '''DO NOT CLEAR LEARNED VALUES IF YOU HAVE NOT REPLACED THE THROTTLE BODY CONTROL MODULE!''' Otherwise the proper values are being cleared and incorrect values are being learned.

'''[Select]''' 
'''[01 - Engine]''' (for Bank 1/J388) or '''11 - Engine 2''' (for Bank 2/J544) 

'''[Coding-II - 11]''' 
* Enable the Learning Procedure by Entering '''10021'''.
'''[Do It!]''' 
'''[Done, Go Back]''' 
'''[Close Controller, Go Back - 06]''' 
* Switch the Ignition OFF.
* Switch the Ignition ON for 1 Second, then turn it OFF immediately.
* Wait at least 30 Seconds, then switch the Ignition ON again.
* Now Check if all remaining fault codes can be cleared.

[[Category:Fault Codes]]

P106B/004203 - Revision history

RtWiKiSyS0p at 15:43, 30 March 2012

RtWiKiSyS0p at 14:31, 28 April 2008

RtWiKiSyS0p at 14:31, 28 April 2008

RtWiKiSyS0p at 14:29, 28 April 2008

RtWiKiSyS0p: New page: __FORCETOC__ == P106B/004203 - Throttle Valve: Stuck or difficult to move == ==== Possible Symptoms ==== * Malfunction Indicator Lamp (MIL) active ==== Possible Causes ==== * Wiring/Co...

RtWiKiSyS0p: New page: FORCETOC == P106B/004203 - Throttle Valve: Stuck or difficult to move == ==== Possible Symptoms ==== * Malfunction Indicator Lamp (MIL) active ==== Possible Causes ==== * Wiring/Co...