Trailer Hitch Retrofitting (5N) - Revision history

Dana: /* Configuration */

2019-10-29T14:13:26Z

Configuration

← Older revision		Revision as of 14:13, 29 October 2019
Line 24:		Line 24:
	** ''Due to different Control Modules and Equipment in the Car the actual Setting is not documented here but will automatically be shown once you access the Coding/Adaptation Function using VCDS. A Security Access may be necessary prior to Coding the Module.''		** ''Due to different Control Modules and Equipment in the Car the actual Setting is not documented here but will automatically be shown once you access the Coding/Adaptation Function using VCDS. A Security Access may be necessary prior to Coding the Module.''
	* '''Update the Rear View Camera (J772 / #6C) Coding, if installed.'''		* '''Update the Rear View Camera (J772 / #6C) Coding, if installed.'''
			** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''
			* '''Update the Frt Sens. Drv. Assist (R242/ #A5) Coding, if installed.'''
	** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''		** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''

Dana at 14:40, 28 June 2016

2016-06-28T14:40:05Z

← Older revision		Revision as of 14:40, 28 June 2016
Line 11:		Line 11:
	The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.		The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.

	* '''Update the Installation List in the Gateway (J533 / #19).'''		* '''Update the [[http://www.ross-tech.com/vcds/tour/installation-list.html Installation List]] in the Gateway (J533 / #19).'''
	** Register the newly added '''69 - Trailer''' Control Module.		** Register the newly added '''69 - Trailer''' Control Module.
	* '''Update the Trailer Control Module (J345 / #69) Coding.'''		* '''Update the Trailer Control Module (J345 / #69) Coding.'''

Dana at 18:21, 29 June 2015

2015-06-29T18:21:02Z

← Older revision		Revision as of 18:21, 29 June 2015
Line 26:		Line 26:
	** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''		** ''Due to different Control Modules and Equipment in the Car the actual Coding Table is not shown here but will automatically be used by the Long Coding Assistant once you access the Function using VCDS.''

			Notes:
	~~'''''~~If you are having trouble finding/calculating the proper Coding using the Long Coding ~~Assist~~ [http://ross-tech.com/~~contact~~.~~html please~~ Contact us directly].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''		* Some 2010 and newer NAR (North American Region) 2.0T engine controllers may not support Trailer Installed coding. If the Engine controller explicitly rejects the new coding proceed with the remaining steps on this page.
			* If you are having trouble finding/calculating the proper Coding using the Long Coding Assistant registered users can join and post the inquiry in our Retrofits [http://forums.ross-tech.com/forumdisplay.php?10-Retrofits sub-forum] or Contact us directly via [mailto:Support@Ross-Tech.com email].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.
	__NOTOC__		__NOTOC__

RtWiKiSyS0p at 09:11, 3 August 2012

2012-08-03T09:11:58Z

@@ Line 1: / Line 1: @@
-__FORCETOC__
+''These instructions may not cover mechanical/electronic details, they will only list the the diagnostic side (coding etc.). Additional details for the mechanical/electronic work needed are part of the retrofitting instructions provided by the parts supplier (i.e. trailer hitch retrofits) or can be found in the factory repair manuals and wiring diagrams.''
-== Trailer Control Module ==
+Information regarding the Installation can be found in the Repair Manuals, the Wiring Diagrams, the Parts Catalog and/or the Instructions included in the Retrofitting Kit.
-'''''Variant #1:''' ''Trailer Control Module (#69) NOT diagnostic capable''
+The following Activations are necessary to ensure that the newly fitted parts are properly recognized and are ready to use.
-Nothing to do here, so leave it alone.
+* '''Update the Installation List in the Gateway (J533 / #19).'''
-This control module requires a coding, see VAG-COM coding help or vehicle specific [[Diagnostic Procedures|diagnostic procedures]] for details.
+'''''If you are having trouble finding/calculating the proper Coding using the Long Coding Assist [http://ross-tech.com/contact.html please Contact us directly].''' Make sure to include a complete Diagnostic Protocol (Auto-Scan) from the Car and state which steps/work you have performed yet.''
+__NOTOC__

RtWiKiSyS0p: New page: FORCETOC == CAN-Gateway == '''[Select]'''
'''[19 - CAN-Gateway]'''
'''[Coding - 07]'''
'''[Long Coding Helper]'''
** Set ''Byte 03 Bit 6 = [69] Trailer'' active.
'...

2008-07-18T21:12:32Z

New page: __FORCETOC__ == CAN-Gateway == '''[Select]''' '''[19 - CAN-Gateway]''' '''[Coding - 07]''' '''[Long Coding Helper]''' ** Set ''Byte 03 Bit 6 = [69] Trailer'' active. '...

New page

__FORCETOC__
== CAN-Gateway ==

'''[Select]''' 
'''[19 - CAN-Gateway]''' 
'''[Coding - 07]''' 
'''[Long Coding Helper]''' 
** Set ''Byte 03 Bit 6 = [69] Trailer'' active. 
'''[Do It!]''' 
'''[Close Controller, Go Back - 06]''' 

== Trailer Control Module ==

'''''NOTE:''' This part varies depending on the type of the trailer control module. There are 2 variants available, those which are diagnostic capable and those who are not''

'''''Variant #1:''' ''Trailer Control Module (#69) NOT diagnostic capable''

Nothing to do here, so leave it alone.

'''''Variant #2:''' ''Trailer Control Module (#69) diagnostic capable''

This control module requires a coding, see VAG-COM coding help or vehicle specific [[Diagnostic Procedures|diagnostic procedures]] for details.

== Parking Aid ==

This control module needs to be recoded, see VAG-COM coding help or vehicle specific [[Diagnostic Procedures|diagnostic procedures]] for details.

== Engine ==

Normally there is no activation of the trailer hitch in the ECU necessary, however the following engines require to be recoded:

* [[2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)|2.0l TFSI]]

Trailer Hitch Retrofitting (5N) - Revision history

Dana: /* Configuration */

Dana at 14:40, 28 June 2016

Dana at 18:21, 29 June 2015

RtWiKiSyS0p at 09:11, 3 August 2012

RtWiKiSyS0p: New page: __FORCETOC__ == CAN-Gateway == '''[Select]''' '''[19 - CAN-Gateway]''' '''[Coding - 07]''' '''[Long Coding Helper]''' ** Set ''Byte 03 Bit 6 = [69] Trailer'' active. '...

RtWiKiSyS0p: New page: FORCETOC == CAN-Gateway == '''[Select]'''
'''[19 - CAN-Gateway]'''
'''[Coding - 07]'''
'''[Long Coding Helper]'''
** Set ''Byte 03 Bit 6 = [69] Trailer'' active.
'...