VW Touareg (7L) Trunk Electronics - Revision history

Dana at 14:42, 6 June 2017

2017-06-06T14:42:59Z

← Older revision		Revision as of 14:42, 6 June 2017
Line 38:		Line 38:
	* Check for proper operation		* Check for proper operation
	* Re-check for faults		* Re-check for faults

			== Special Notes ==
			NAR and RoW market TPIs exist for rear lid concerns with 6D part number modules when the rear lid is limited to 1/3 travel (31°):
			* 7L6 959 107 (all software levels)
			* 7L6 959 107 A (software level 1210)
			** RoW market TPI 2017458
			** NAR market TPI 2018695
			After the flash update is completed address 6D should show part number 7L6 959 107 B @ software level: 1310




	Internal use references: ST?ID=59047 -and- ST?ID=37245		Internal use references: ST?ID=59047 -and- ST?ID=37245

Dana at 16:54, 8 March 2016

2016-03-08T16:54:31Z

← Older revision		Revision as of 16:54, 8 March 2016
Line 17:		Line 17:
	=== Rear Lid relearn ===		=== Rear Lid relearn ===
	'''<u>Prerequisites:</u>'''<br>		'''<u>Prerequisites:</u>'''<br>
	* Rear Lid closed.		* Rear Lid closed
			* No rear lid obstructions or damage to the vehicle
			* Battery voltage at least 12.0V
			* Vehicle is on a flat level surface

	'''[Select]'''<br>		'''[Select]'''<br>

Dana at 15:00, 8 March 2016

2016-03-08T15:00:50Z

← Older revision		Revision as of 15:00, 8 March 2016
Line 16:		Line 16:
	== Basic Setting ==		== Basic Setting ==
	=== Rear Lid relearn ===		=== Rear Lid relearn ===
			'''<u>Prerequisites:</u>'''<br>
			* Rear Lid closed.

	'''[Select]'''<br>		'''[Select]'''<br>
Line 25:		Line 27:
	Group 001<br>		Group 001<br>
	'''[Go!]'''<br>		'''[Go!]'''<br>
			The rear lid Basic Settings will now begin and the rear lid will now open. If the lid does not open use the '''[On/Off/Next]''' button.<br>
	'''[Done, Go Back]'''<br>		'''[Done, Go Back]'''<br>

	~~The rear lid Basic Settings will now begin and the rear lid will now open.~~
	*When the rear lid has stopped, close the rear lid.		*When the rear lid has stopped, close the rear lid.
	*Check for fault codes, clear if needed.		*Check for fault codes, clear if needed.

Dana at 22:23, 7 March 2016

2016-03-07T22:23:49Z

← Older revision		Revision as of 22:23, 7 March 2016
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
	This page applies to ~~vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with~~ Address-6D: Trunk Elect. Component: ~~HDSG-Modul~~. This can be identified by evaluating the data in the Auto-Scan:		This page applies to Address-6D: Trunk Elect.in the VW Touareg (7L6) with Component: J605 HECKKLAPPE. This can be identified by evaluating the data in the Auto-Scan:

	Address 6D: Trunk Elect. ~~(----)~~ Labels: ~~7N0-959-107.clb~~		Address 6D: Trunk Elect. Labels: None
	Part No SW: ~~7P6~~ 959 107 C HW: ~~7P6~~ 959 107		Part No SW: 7L6 959 107 B HW: 7L6 959 107 B
	Component: '''~~HDSG-Modul~~'''		Component: '''J605 HECKKLAPPE''' 1310
	~~ASAM Dataset: EV_HeckkTouar 202142~~

	== Security Access ==		== Security Access ==
Line 12:		Line 11:
	== Coding ==		== Coding ==

	* ~~Coding information~~ is ~~found using the '''[http://www.ross-tech.com/vcds/tour/recode_screen.html Long Coding Helper]''' while connected to the vehicle with VCDS~~.		* This control module is Short coded.
	* When replacing this module save the original coding and transfer it to the new module.<br>		* When replacing this module save the original coding and transfer it to the new module.<br>

Line 19:		Line 18:

	'''[Select]'''<br>		'''[Select]'''<br>
	''' [6D-Trunk Elect.]		''' [6D-Trunk Elect.]<br>

	''' [Security Access - 16]<br>		''' [Security Access - 16]<br>
	Enter [59107]<br>		Enter 59107<br>
	~~Press~~ [Do it!~~]<br>~~		'''[Do it!]'''<br>

	~~'''[Select~~]'''<br>
	'''[Basic Settings - 04]'''<br>		'''[Basic Settings - 04]'''<br>
	Group 001<br>		Group 001<br>
Line 38:		Line 34:
	* Check for proper operation		* Check for proper operation
	* Re-check for faults		* Re-check for faults


			Internal use references: ST?ID=59047 -and- ST?ID=37245

Dana at 22:28, 4 March 2016

2016-03-04T22:28:42Z

← Older revision		Revision as of 22:28, 4 March 2016
Line 1:		Line 1:
	__FORCETOC__		__FORCETOC__
			This page applies to vehicles such as the Skoda Octavia (5E), Skoda Superb (3T), VW Sharan (7N) and VW Touareg with (7P) with Address-6D: Trunk Elect. Component: HDSG-Modul. This can be identified by evaluating the data in the Auto-Scan:

			Address 6D: Trunk Elect. (----) Labels: 7N0-959-107.clb
			Part No SW: 7P6 959 107 C HW: 7P6 959 107
			Component: '''HDSG-Modul'''
			ASAM Dataset: EV_HeckkTouar 202142

			== Security Access ==
			* Security Access codes will appear when connected to the control module with VCDS.

	== Coding ==		== Coding ==

			* Coding information is found using the '''[http://www.ross-tech.com/vcds/tour/recode_screen.html Long Coding Helper]''' while connected to the vehicle with VCDS.
			* When replacing this module save the original coding and transfer it to the new module.<br>

	== Basic Setting ==		== Basic Setting ==

	=== Rear Lid relearn ===		=== Rear Lid relearn ===

Line 8:		Line 21:
	''' [6D-Trunk Elect.]		''' [6D-Trunk Elect.]

	''' [~~Login~~-11]<br>		''' [Security Access - 16]<br>
	Enter [59107]<br>		Enter [59107]<br>
	Press [Do it!]<br>		Press [Do it!]<br>

Peter: Created page with "FORCETOC == Coding == == Basic Setting == === Rear Lid relearn === '''[Select]'''
''' [6D-Trunk Elect.] ''' [Login-11]
Enter [59107]
Press [Do it!]
'''..."

2016-03-04T20:51:09Z

Created page with "__FORCETOC__ == Coding == == Basic Setting == === Rear Lid relearn === '''[Select]''' ''' [6D-Trunk Elect.] ''' [Login-11] Enter [59107] Press [Do it!] '''..."

New page

__FORCETOC__
== Coding ==
== Basic Setting ==

=== Rear Lid relearn ===

'''[Select]''' 
''' [6D-Trunk Elect.]

''' [Login-11] 
Enter [59107] 
Press [Do it!] 

'''[Select]''' 
'''[Basic Settings - 04]''' 
Group 001 
'''[Go!]''' 
'''[Done, Go Back]''' 

The rear lid Basic Settings will now begin and the rear lid will now open.
*When the rear lid has stopped, close the rear lid.
*Check for fault codes, clear if needed.

'''[Close Controller, Go Back - 06]''' 
* Check for proper operation
* Re-check for faults