Difference between revisions of "Audi A8/S8 (4E)"
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 47: | Line 47: | ||
'''[53 - Parking Brake]'''<br> | '''[53 - Parking Brake]'''<br> | ||
'''[Adaptation - 10]'''<br> | '''[Adaptation - 10]'''<br> | ||
| − | Channel 006 | + | Channel 006<br> |
'''[Read]'''<br> | '''[Read]'''<br> | ||
Enter the current thickness of the new pads (Range: 3 - 14 mm).<br> | Enter the current thickness of the new pads (Range: 3 - 14 mm).<br> | ||
Revision as of 09:58, 19 March 2006
Parking Brake
Control Module Basic Setting: Open Rear Parking Brake for Pad Change
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 005
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
Note: Check/change adaptation channel 006 after changing the pads.
Control Module Basic Setting: Open Rear Parking Brake for Repairs
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
Note: Check/change adaptation channel 006 after changing the pads.
Control Module Basic Setting: Close Rear Parking Brake
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
[Done, Go Back]
Control Module Adaptation: Pad Thickness
[Select]
[53 - Parking Brake]
[Adaptation - 10]
Channel 006
[Read]
Enter the current thickness of the new pads (Range: 3 - 14 mm).
[Test]
[Save]
[Done, Go Back]