65535: Difference between revisions
          From Ross-Tech Wiki
          
          
      
      
      
      Table Of Contents
- 
          
          1.
          Internal Control Module Memory Error
          
- 
      
      1.1.1
      Internal Control Module Memory Error
      
- 1.1.1.2 Possible Causes
 
- 1.1.2.2 Possible Solutions
 
- 1.1.3.2 Special Notes
 
 
 - 
      
      1.1.1
      Internal Control Module Memory Error
      
 
RtWiKiSyS0p (talk | contribs) mNo edit summary  | 
				No edit summary  | 
				||
| Line 22: | Line 22: | ||
** Problem: A fault of the acceleration sensor may result in the above fault.  | ** Problem: A fault of the acceleration sensor may result in the above fault.  | ||
** Solution: Replace Airbag control module and both acceleration sensors.  | ** Solution: Replace Airbag control module and both acceleration sensors.  | ||
* Certain older TDI ECUs which have a vacuum line going to them  | |||
** Problem:  Vacuum line broken, either before ECU or inside ECU.  | |||
** Solution: Inspect and repair vacuum lines to ECU and inside ECU.  | |||
[[Category:Fault Codes]]  | [[Category:Fault Codes]]  | ||
Revision as of 14:17, 25 November 2006
Internal Control Module Memory Error
Internal Control Module Memory Error
Possible Causes
- Control Module housing leaky > Control Module wet
 - Wiring from/to Control Module faulty
 - Control Module faulty
 
Possible Solutions
- Check/Clean Wiring from/to Control Module
 - Replace Control Module
 
Special Notes
- This fault has NOT to be ignored when found in a major and/or critical system (Airbag, ABS etc.).
 - When stored in other systems (Radio etc.) the general suggestion is to ignore it unless you notice functional limitations.
 - Audi Airbag 6 & 7
- Problem: A fault of the acceleration sensor may result in the above fault.
 - Solution: Replace Airbag control module and both acceleration sensors.
 
 - Certain older TDI ECUs which have a vacuum line going to them
- Problem: Vacuum line broken, either before ECU or inside ECU.
 - Solution: Inspect and repair vacuum lines to ECU and inside ECU.