Difference between revisions of "Immobilizer IV ECU Swapping"
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 2: | Line 2: | ||
'''This procedure details how to change the Engine Control Unit (ECU) on VW/Audi/Seat/Skoda vehicles with Immobilizer IV.''' | '''This procedure details how to change the Engine Control Unit (ECU) on VW/Audi/Seat/Skoda vehicles with Immobilizer IV.''' | ||
| − | == Determining | + | == Determining VIN (ECU) & IMMO-ID/Challenge == |
'''[Select]'''<br> | '''[Select]'''<br> | ||
| Line 9: | Line 9: | ||
Select Block 081.<br> | Select Block 081.<br> | ||
'''[Go!]'''<br> | '''[Go!]'''<br> | ||
| − | ''The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.'' | + | ''The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID (does not apply for all models).''<br> |
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| + | |||
| + | ''On models which do not have an IMMO-ID you need to use the IMMO-Challenge instead.''<br> | ||
| + | '''[Advanced ID - 1A]'''<br> | ||
| + | ''See the field IMMO-Challenge for the current value, keep in mind that the challenge changes with every ignition cycle!''<br> | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
| − | == Determining | + | == Determining VIN (Instrument Cluster) & IMMO-ID/Challenge == |
'''[Select]'''<br> | '''[Select]'''<br> | ||
| Line 21: | Line 25: | ||
Select Block 081.<br> | Select Block 081.<br> | ||
'''[Go!]'''<br> | '''[Go!]'''<br> | ||
| − | ''The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.'' | + | ''The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID (does not apply for all models).''<br> |
'''[Done, Go Back]'''<br> | '''[Done, Go Back]'''<br> | ||
| + | |||
| + | ''On models which do not have an IMMO-ID you need to use the IMMO-Challenge instead.''<br> | ||
| + | '''[Advanced ID - 1A]'''<br> | ||
| + | ''See the field IMMO-Challenge for the current value, keep in mind that the challenge changes with every ignition cycle!''<br> | ||
'''[Close Controller, Go Back - 06]'''<br> | '''[Close Controller, Go Back - 06]'''<br> | ||
| Line 43: | Line 51: | ||
''For the following procedure, '''use the PIN of the NEW (USED)''' instrument cluster.''<br> | ''For the following procedure, '''use the PIN of the NEW (USED)''' instrument cluster.''<br> | ||
''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''<br> | ''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''<br> | ||
| − | * '''4-digit PIN''' | + | * '''4/5-digit PIN''' |
| − | ** | + | ** The PIN needs to be entered as 5-digit number. ''For example, if your PIN is 1234, enter 01234.'' |
* '''7-digit PIN''' | * '''7-digit PIN''' | ||
** '''[Use 7-digit PIN/SKC]''' | ** '''[Use 7-digit PIN/SKC]''' | ||
| Line 61: | Line 69: | ||
''For the following procedure, '''use the PIN of the OLD (ORIGINAL)''' instrument cluster.''<br> | ''For the following procedure, '''use the PIN of the OLD (ORIGINAL)''' instrument cluster.''<br> | ||
''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''<br> | ''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''<br> | ||
| − | * '''4-digit PIN''' | + | * '''4/5-digit PIN''' |
| − | ** | + | ** The PIN needs to be entered as 5-digit number. ''For example, if your PIN is 1234, enter 01234.'' |
* '''7-digit PIN''' | * '''7-digit PIN''' | ||
** '''[Use 7-digit PIN/SKC]''' | ** '''[Use 7-digit PIN/SKC]''' | ||
Revision as of 10:37, 6 December 2006
This procedure details how to change the Engine Control Unit (ECU) on VW/Audi/Seat/Skoda vehicles with Immobilizer IV.
Determining VIN (ECU) & IMMO-ID/Challenge
[Select]
[01 - Engine]
[Meas. Blocks - 08]
Select Block 081.
[Go!]
The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID (does not apply for all models).
[Done, Go Back]
On models which do not have an IMMO-ID you need to use the IMMO-Challenge instead.
[Advanced ID - 1A]
See the field IMMO-Challenge for the current value, keep in mind that the challenge changes with every ignition cycle!
[Close Controller, Go Back - 06]
Determining VIN (Instrument Cluster) & IMMO-ID/Challenge
[Select]
[25 - Immobilizer]
[Meas. Blocks - 08]
Select Block 081.
[Go!]
The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID (does not apply for all models).
[Done, Go Back]
On models which do not have an IMMO-ID you need to use the IMMO-Challenge instead.
[Advanced ID - 1A]
See the field IMMO-Challenge for the current value, keep in mind that the challenge changes with every ignition cycle!
[Close Controller, Go Back - 06]
Engine Control Unit (ECU) Swapping (Used ECU)
Prerequisites:
- The NEW (USED) cluster is installed in the car.
- Battery voltage at least 12.0 V.
- All relevant coding and adaptation values have been transferred from the OLD (ORIGINAL) ECU to the NEW (USED) ECU.
- Make sure to have BOTH PIN's, from the OLD (ORIGINAL) and the NEW (USED) ECU.
- Make sure to have the Radio Code (for factory radios only).
[Select]
[01 - Engine]
[Security Access - 16]
For the following procedure, use the PIN of the NEW (USED) instrument cluster.
There are 2 possibilities how to enter a PIN, choose the one that applies for you.
- 4/5-digit PIN
- The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
- 7-digit PIN
- [Use 7-digit PIN/SKC]
- Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
- [OK]
- VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
[Do it!]
- The instrument cluster now shows Immobilizer Adaptation active, wait until it changes to Immobilizer active - this may take up to 2 Minutes.
[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]
For the following procedure, use the PIN of the OLD (ORIGINAL) instrument cluster.
There are 2 possibilities how to enter a PIN, choose the one that applies for you.
- 4/5-digit PIN
- The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
- 7-digit PIN
- [Use 7-digit PIN/SKC]
- Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
- [OK]
- VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
- Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.
- Verify that the NEW (USED) ECU now shows the VIN/IMMO-ID of the vehicle now.