Difference between revisions of "Trailer Hitch Retrofitting (4F)"
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
Line 38: | Line 38: | ||
− | == | + | == Others == |
+ | If installed the following modules may need to be recoded. | ||
− | + | * [[Audi A6 (4F) Parking Aid|Parking Aid]] | |
− | + | * Engine ''(does NOT apply if engine is not mentioned)'' | |
− | + | ** [[2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)|2.0l TFSI]] | |
− | + | ** 2.4l V6 MPI | |
− | + | ** 3.2l V6 FSI | |
− | + | * [[Audi A6 (4F) Level Control|Level Control]] | |
− | + | * [[Audi A6 (4F) Distance Regulation|Distance Regulation]] | |
− | * [[2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)|2.0l TFSI]] | ||
− | * 2.4l V6 MPI | ||
− | * 3.2l V6 FSI | ||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 14:11, 14 December 2006
CAN-Gateway
[Select]
[19 - CAN-Gateway]
[Coding - 07]
[Long Coding Helper]
Set Byte 00 Bit 0 = [69] Trailer active.
[Do It!]
[Close Controller, Go Back - 06]
Trailer Control Module
NOTE: This part varies depending on the type of the trailer control module. There are 2 variants available, those which are diagnostic capable and those who are not.
Variant #1: Trailer Control Module (#69) NOT diagnostic capable
Nothing to do here, so leave it alone.
Variant #2: Trailer Control Module (#69) diagnostic capable
This control module requires a coding, see VAG-COM coding help or vehicle specific diagnostic procedures for details.
Trailer Stabilization
NOTE: Activating this feature is only permitted for cars that come with a trailer hitch as factory installed equipment or where the retrofitted trailer hitch is similar to the factory installed one.
[Select]
[03 - Brake Electronics]
[Coding - 07]
Note the current coding and substract 0016384 from it (e.g. 0020871 - 0016384 = 0004487).
[Do it!]
[Close Controller, Go Back - 06]
Others
If installed the following modules may need to be recoded.
- Parking Aid
- Engine (does NOT apply if engine is not mentioned)
- 2.0l TFSI
- 2.4l V6 MPI
- 3.2l V6 FSI
- Level Control
- Distance Regulation