01521: Difference between revisions

Latest revision as of 00:12, 8 April 2008

Check/Install Tire Pressure Sensors
- Check individual Sensors via Measuring Value Blocks (MVB)

On Systems without Position Recognition (e.g. 1K-chassis Golf/Jetta or or 3C-chassis Passat), raise or lower the pressure in one tire at a time and double check the Measuring Value Blocks (MVB) 001-012 (and 016) for changes. If you find one which does not change after raising or lowering the Pressure, you have most likely found the faulty Sensor.
- Note: It may take up to 2 minutes before a pressure change is detected by the control module and displayed in the Measuring Value Block (MVB). To locate the individual Wheels it helps to make a note the Sensor Identification Number.

@@ Line 38: / Line 38: @@
 ==== Special Notes ====
-* On Systems without Position Recognition (e.g. Golf/Jetta (1K) or Passat (3C)) raise or lower the Pressure for one Tire after the other and double check the Measuring Value Blocks (MVB) 001-012 (and 016) for changes. If you can determine no Change in the Measuring Value Blocks (MVB) after raising/lowering the Pressure you have most likely found the faulty Sensor.
+* On Systems without Position Recognition (e.g. 1K-chassis Golf/Jetta or or 3C-chassis Passat), raise or lower the pressure in one tire at a time and double check the Measuring Value Blocks (MVB) 001-012 (and 016) for changes.  If you find one which does not change after raising or lowering the Pressure, you have most likely found the faulty Sensor.
-** ''Note: It may take up to 2 minutes until the Pressure Change is being displayed in the Measuring Value Block (MVB). To locate the individual Wheels it helps to note the Sensor Identification Number.''
+** ''Note: It may take up to 2 minutes before a pressure change is detected by the control module and displayed in the Measuring Value Block (MVB). To locate the individual Wheels it helps to make a note the Sensor Identification Number.''
 [[Category:Fault Codes]]