Difference between revisions of "01044"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 12: | Line 12: | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| + | * Check [http://www.ross-tech.com/vag-com/tour/autoscan.html#gateway Gateway Installation List] | ||
* Check/Fix [http://www.ross-tech.com/vag-com/tour/recode_screen.html Control Module Coding] | * Check/Fix [http://www.ross-tech.com/vag-com/tour/recode_screen.html Control Module Coding] | ||
** See [[Diagnostic_Procedures|Vehicle Specific Diagnostic Procedures]] for Details | ** See [[Diagnostic_Procedures|Vehicle Specific Diagnostic Procedures]] for Details | ||
| Line 17: | Line 18: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * When found in CAN-Gateway, use Gateway Installation List | + | * When found in CAN-Gateway, use the [http://www.ross-tech.com/vag-com/tour/autoscan.html#gateway Gateway Installation List] to check for unreachable or not registered control modules. Then update the [http://www.ross-tech.com/vag-com/tour/autoscan.html#gateway Gateway Installation List] by altering the Gateway Coding manually. |
Revision as of 09:35, 21 April 2008
01044 - Control Module Incorrectly Coded
Possible Symptoms
- Reduced Functionality
Possible Causes
- Control Module incorrectly coded
Possible Solutions
- Check Gateway Installation List
- Check/Fix Control Module Coding
- See Vehicle Specific Diagnostic Procedures for Details
Special Notes
- When found in CAN-Gateway, use the Gateway Installation List to check for unreachable or not registered control modules. Then update the Gateway Installation List by altering the Gateway Coding manually.
01044 - Control Module Incorrectly Coded: Implausible Signal
Possible Symptoms
- Reduced Functionality
- Malfunction Indicator Light (MIL) active
Possible Causes
- Control Module incorrectly coded
Possible Solutions
- Check/Fix Control Module Coding
- See Vehicle Specific Diagnostic Procedures for Details
Special Notes
- Some Passat (3B/B5) around MY 2000 have a Firmware Bug which causes this DTC to be set in the CAN Gateway (19). Service Documents for of those Cars indicate that this DTC should be ignored in that Module as long as the Coding matches the Vehicle Equipment.
01044 - Control Module Incorrectly Coded: Mechanical Failure
Possible Causes
- Coding Pin/Bridge does not match
- Control Module incorrectly coded
Possible Solutions
- Check/Fix Coding Pin/Bridge in Wiring
- Check/Fix Control Module Coding
- See Vehicle Specific Diagnostic Procedures for Details