01331: Difference between revisions

Latest revision as of 11:58, 22 March 2009

When found in an individual control module, it's most likely a local source (e.g. wiring/connectors).
When found in multiple control modules at the same time, it's most likely a common source (e.g. ground spot, battery, generator).
Intermittent codes are often stored during low outside temperature when the battery capacity goes down and may be ignored.

@@ Line 21: / Line 21: @@
 * When found in multiple control modules at the same time, it's most likely a common source (e.g. ground spot, battery, generator).
 * Intermittent codes are often stored during low outside temperature when the battery capacity goes down and may be ignored.
+=== 01331 - Door Control Module; Driver Side (J386): Faulty ===
+==== Possible Causes ====
+* Fuse(s) faulty
+* Wiring/Connectors from/to Control Module faulty
+* Door Control Module Driver Side (J386) faulty
+==== Possible Solutions ====
+* Check Fuse(s)
+* Check/Repair Wiring/Connectors from/to Control Module
+* Check Door Control Module Driver Side (J386)
+=== 01331 - Door Control Module; Driver Side (J386): Single-Wire Operation ===
+==== Possible Symptoms ====
+* Data Bus Comfort working in Single-Wire Mode
+==== Possible Causes ====
+* Wiring/Connectors from/to Door Control Module Driver Side (J386)
+* Control Module in CAN Data Bus Comfort faulty
+==== Possible Solutions ====
+* Check Measuring Value Blocks (MVB)
+* Check Wiring/Connectors from/to Door Control Module Driver Side (J386)
 [[Category:Fault Codes]]