16786/P0402/001026: Difference between revisions

From Ross-Tech Wiki
No edit summary
 
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
__FORCETOC__
__FORCETOC__
== 16786/P0402 - Exhaust Gas Recirculation Flow Excessive Detected ==
== 16786/P0402/001026 - Exhaust Gas Recirculation (EGR): Excessive Flow ==


==== Possible Symptoms ====
==== Possible Symptoms ====


* Drivebility problems (check dtc's with Knock Sensor)
* Malfunction Indicator Light (MIL) ON
* Irregular behaviour
* Reduced Exhaust Gas Recirculation (EGR)
* Reduced Power Output/Engine running rough
* Increased Emissions


==== Possible Causes ====
==== Possible Causes ====


* EGR valve stuck open
* Exhaust Gas Recirculation (EGR) Valve stuck open/leaking/faulty
* EGR damaged
* Exhaust Gas Recirculation (EGR) System leaking/faulty
* Circuit DPF EGR sensor (differential pressure) disconnected, short to B+ or Ground
* Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve faulty
* Slow responding DPF EGR sensor
* DPF EGR sensor downstream hose off or plugded
* DPF EGR sensor damaged, wrong attached
* Control Module damaged


==== Possible Solutions ====
==== Possible Solutions ====


* Check all wiring and connections to and from EGR and DPF-EGR
* Check/Clean Exhaust Gas Recirculation (EGR) System
* Check the EGR: use a vacuumpump and pull open the EGR: rpm should change
* Check/Replace Exhaust Gas Recirculation (EGR) Valve
* Clean the EGR
* Check Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve
* Check / Replace EGR
* Check / Replace DPF-EGR
* Check voltage DPF EGR sensor (when idle and when EGR is open)
 
==== Special Notes ====
 
* The EGR system is monitored when driving at steady state and the EGR is commanded on. When the DPF-EGR sensor indicates that EGR flow is less then a desired minimum a dtc is set.
* N.B. mechanics with less knowledge do exchange the EGR often, but 75% sure the problem will be back (probably the DPF-EGR sensor causes the problem).


[[Category:Fault Codes]]
[[Category:Fault Codes]]

Latest revision as of 13:23, 6 April 2009

16786/P0402/001026 - Exhaust Gas Recirculation (EGR): Excessive Flow

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • Reduced Exhaust Gas Recirculation (EGR)
  • Reduced Power Output/Engine running rough
  • Increased Emissions

Possible Causes

  • Exhaust Gas Recirculation (EGR) Valve stuck open/leaking/faulty
  • Exhaust Gas Recirculation (EGR) System leaking/faulty
  • Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve faulty

Possible Solutions

  • Check/Clean Exhaust Gas Recirculation (EGR) System
  • Check/Replace Exhaust Gas Recirculation (EGR) Valve
  • Check Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve
Retrieved from "https://wiki.ross-tech.com/wiki/index.php?title=16786/P0402/001026&oldid=4715"
Contact Privacy Accessibility