Difference between revisions of "17114/P0730/001840"

From Ross-Tech Wiki
m
m
Line 20: Line 20:
  
 
* Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module.
 
* Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module.
* Instructions on how to check the Transmission Fluid as well as Details on a special Test Kit can be found in TPI 2016661. TPI 2006088 may also be relevant.
+
* When found in [[6-Speed Automatic Transmission (01J/Multitronic)]], instructions on how to check the Transmission Fluid as well as Details on a special Test Kit can be found in TPI 2016661. TPI 2006088 may also be relevant.
 
* When found in [[6-Speed Automatic Transmission (01J/Multitronic)]], a conversion from 6 to 7 Clutch Plates may be possible. See TPI 2004856 for Details.
 
* When found in [[6-Speed Automatic Transmission (01J/Multitronic)]], a conversion from 6 to 7 Clutch Plates may be possible. See TPI 2004856 for Details.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 13:35, 1 June 2009

17114/P0730/001840 - Gear Ratio Monitoring: Incorrect Gear Ratio

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Transmission Fluid contaminated
  • Transmission faulty (Mechanical Problem)

Possible Solutions

  • Check Transmission Fluid (Color and Contamination)
    • Replace Transmission Fluid when necessary
  • Check Transmission Mechanics

Special Notes

  • Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module.
  • When found in 6-Speed Automatic Transmission (01J/Multitronic), instructions on how to check the Transmission Fluid as well as Details on a special Test Kit can be found in TPI 2016661. TPI 2006088 may also be relevant.
  • When found in 6-Speed Automatic Transmission (01J/Multitronic), a conversion from 6 to 7 Clutch Plates may be possible. See TPI 2004856 for Details.