16497/P0113/000275: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
Gerrit Speek (talk | contribs) No edit summary |
RtWiKiSyS0p (talk | contribs) m moved 16497/P0113 to 16497/P0113/000275 |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
== 16497/P0113/000275 - Intake Air Temp. Sensor (G42): Signal too High == | |||
== 16497/P0113 - Intake Air | |||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
* | * Malfunction Indicator Light (MIL) ON | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
* | * Fuse(s) faulty | ||
* Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42) faulty | |||
* Sensor | * Intake Air Temp. Sensor (G42) faulty | ||
* | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Check | * Check Fuse(s) | ||
* Check / | * Check Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42) | ||
* Check / Replace | * Check/Replace Intake Air Temp. Sensor (G42) | ||
__FORCETOC__ | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 12:09, 1 June 2010
16497/P0113/000275 - Intake Air Temp. Sensor (G42): Signal too High
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Fuse(s) faulty
- Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42) faulty
- Intake Air Temp. Sensor (G42) faulty
Possible Solutions
- Check Fuse(s)
- Check Wiring and/or Connector(s) from/to Intake Air Temp. Sensor (G42)
- Check/Replace Intake Air Temp. Sensor (G42)