17971/P1563/005475: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
17971/P1563/005475 - Quantity Adjuster (N146): Lower Limit Reached
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Notes
RtWiKiSyS0p (talk | contribs) New page: __FORCETOC__ == 17971/P1563/005475 - Quantity Adjuster (N146): Lower Limit Reached == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) ON * Reduced Power * Engine jerking ... |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 21: | Line 21: | ||
* Check/Adjust Quantity Adjuster (N146) | * Check/Adjust Quantity Adjuster (N146) | ||
* Check/Replace Injection Pump | * Check/Replace Injection Pump | ||
==== Notes ==== | |||
* On the 1.9L ALH TDI engine: | |||
** The Quantity Adjuster (N146) should ohm test between 0.5 and 2.5 Ω. | |||
** With the coolant above 85° C, MVB 001, Field 3 should read between 1.45 to 2.0 Volts. | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 21:26, 17 August 2011
17971/P1563/005475 - Quantity Adjuster (N146): Lower Limit Reached
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
- Reduced Power
- Engine jerking
Possible Causes
- Fuse(s) faulty
- Wiring and/or Connector(s) from/to Quantity Adjuster (N146) faulty
- Quantity Adjuster (N146) not adjusted
- Quantity Adjuster (N146) blocked/faulty
Possible Solutions
- Check Fuse(s)
- Check Wiring and/or Connector(s) from/to Quantity Adjuster (N146)
- Check/Adjust Quantity Adjuster (N146)
- Check/Replace Injection Pump
Notes
- On the 1.9L ALH TDI engine:
- The Quantity Adjuster (N146) should ohm test between 0.5 and 2.5 Ω.
- With the coolant above 85° C, MVB 001, Field 3 should read between 1.45 to 2.0 Volts.