02628: Difference between revisions

Revision as of 23:24, 17 October 2011

Wiring/Connectors from/to Sensor for Swivel Module Position Right faulty
- Connectors not properly attached AND/OR Pins widened
- Connectors wet/corroded
Sensor for Swivel Module Position Right faulty

Check/Repair Wiring/Connectors from/to Sensor for Swivel Module Position Right
Check/Replace Sensor for Swivel Module Position Right
- Sensor may be part of the Headlight and the complete Headlight may need to be replaced

When found in Volkswagen Passat (3C): Headlight Leveling, check TPI 2012732.
- If the Fault Code is static (not intermittent) and the Right Subsystem/Slave Swiveling Module has Software Level X017 or lower just replace the Swiveling Module - do NOT replace the Headlight/Housing at this point.
- If the Fault Code is intermittent and the Right Subsystem/Slave Swiveling Module has Software Level X017 or lower replace the Swiveling Module and the Headlight/Housing.
- If the Right Subsystem/Slave Swiveling Module has Software Level X018 replace only the Headlight/Housing.

@@ Line 20: / Line 20: @@
 * Check/Replace Sensor for Swivel Module Position Right
 ** Sensor may be part of the Headlight and the complete Headlight may need to be replaced
+==== Special Notes ====
+* When found in [[Volkswagen Passat (3C): Headlight Leveling]], check TPI 2012732.
+** If the Fault Code is static (not intermittent) and the Right Subsystem/Slave Swiveling Module has Software Level X017 or lower just replace the Swiveling Module - do NOT replace the Headlight/Housing at this point.
+** If the Fault Code is intermittent and the Right Subsystem/Slave Swiveling Module has Software Level X017 or lower replace the Swiveling Module and the Headlight/Housing.
+** If the Right Subsystem/Slave Swiveling Module has Software Level X018 replace only the Headlight/Housing.
 [[Category:Fault Codes]]