Difference between revisions of "19143/P2711/010001"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 11: | Line 11: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| + | * Double Clutch worn/faulty | ||
* Output Shaft Speed Sensor 1/2 (G501/G502) faulty | * Output Shaft Speed Sensor 1/2 (G501/G502) faulty | ||
* Mechatronic Unit for Double Clutch Transmission (J743) faulty | * Mechatronic Unit for Double Clutch Transmission (J743) faulty | ||
| Line 18: | Line 19: | ||
* Check Output Shaft Speed Sensor 1/2 (G501/G502) | * Check Output Shaft Speed Sensor 1/2 (G501/G502) | ||
** Check Measuring Value Blocks (MVB) | ** Check Measuring Value Blocks (MVB) | ||
| + | * Check/Replace Double Clutch | ||
* Check/Replace Mechatronic Unit for Double Clutch Transmission (J743) | * Check/Replace Mechatronic Unit for Double Clutch Transmission (J743) | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]] | + | * When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]]: |
| + | ** Check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged. | ||
| + | ** According to Skoda TPI 2024152 an updated Clutch Set is available which addresses these issues. | ||
Revision as of 06:16, 23 May 2012
19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement
19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No Signal/Communication
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
- Transmission Malfunction
- Erratic Driving Behavior
Possible Causes
- Double Clutch worn/faulty
- Output Shaft Speed Sensor 1/2 (G501/G502) faulty
- Mechatronic Unit for Double Clutch Transmission (J743) faulty
Possible Solutions
- Check Output Shaft Speed Sensor 1/2 (G501/G502)
- Check Measuring Value Blocks (MVB)
- Check/Replace Double Clutch
- Check/Replace Mechatronic Unit for Double Clutch Transmission (J743)
Special Notes
- When found in 6-Speed Direct Shift Gearbox (DSG/02E):
- Check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged.
- According to Skoda TPI 2024152 an updated Clutch Set is available which addresses these issues.
19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation
Special Notes
- When found in 6-Speed Direct Shift Gearbox (DSG/02E), perform Basic Setting.