Difference between revisions of "User:Peter"
From Ross-Tech Wiki
| Line 10: | Line 10: | ||
Group-055 Field-1 = G289( _Sensor)Min value'''<br> | Group-055 Field-1 = G289( _Sensor)Min value'''<br> | ||
Group-055 Field-2 = G289( _Sensor)Max value'''<br> | Group-055 Field-2 = G289( _Sensor)Max value'''<br> | ||
| − | + | <br> | |
| − | Look at: | + | Look at:'''<br> |
Group-003 Field-1,2,3 | Group-003 Field-1,2,3 | ||
| − | - If the values are with in the range of the Min - Max | + | - If the values are with in the range of the Min - Max'''<br> |
| − | Basic settings can be performed, if not inspect suspension. | + | Basic settings can be performed, if not inspect suspension.'''<br> |
| − | + | <br> | |
| − | [Security Access - 16] | + | '''[Security Access - 16]'''<br> |
| − | Enter 31564, to enable the basic setting. | + | Enter 31564, to enable the basic setting.'''<br> |
| − | [Do it!] | + | '''[Do it!]'''<br> |
| − | [Basic Settings - 04] | + | '''[Basic Settings - 04]'''<br> |
Group 001 | Group 001 | ||
| − | [Go!] | + | '''[Go!]'''<br> |
| − | The New values should be displayed. | + | <br> |
| − | - To check the learned values, check Measuring Value Group-008. | + | The New values should be displayed.'''<br> |
| − | [Meas. Blocks - 08] | + | - To check the learned values, check Measuring Value Group-008.'''<br> |
| − | Enter [008] - Go! | + | [Meas. Blocks - 08]'''<br> |
| − | The values displayed should be the learned values as displayed in the | + | Enter [008] - Go!'''<br> |
| − | Basic Settings window. | + | The values displayed should be the learned values as displayed in the Basic Settings window.'''<br> |
Revision as of 09:56, 3 May 2013
Electronic Damping Control J250 - Basic Settings
[Select]
[14 - Susp. Elect]
[Meas. Blocks - 08]
Note the values stores in:
Group-054 Field-1 = G78( _Sensor)Min value
Group-054 Field-2 = G78( _Sensor)Max value
Group-055 Field-1 = G289( _Sensor)Min value
Group-055 Field-2 = G289( _Sensor)Max value
Look at:
Group-003 Field-1,2,3
- If the values are with in the range of the Min - Max
Basic settings can be performed, if not inspect suspension.
[Security Access - 16]
Enter 31564, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
The New values should be displayed.
- To check the learned values, check Measuring Value Group-008.
[Meas. Blocks - 08]
Enter [008] - Go!
The values displayed should be the learned values as displayed in the Basic Settings window.