Difference between revisions of "16490/P0106/000262"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 27: | Line 27: | ||
* On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions. | * On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions. | ||
| + | * The F96 can be an internal part of the ECM. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 11:23, 30 October 2014
16490/P0106/000262 - Manifold / Barometric Pressure Sensor (G71) / (F96): Implausible Signal
Possible Symptoms
- Erratic Idle
Possible Causes
- Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
- Leak in Air Intake and/or Exhaust
- Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
- Engine Control Module faulty
Possible Solutions
- Check Engine Control Module Software Version
- See Special Notes for Details
- Check Timing
- See Special Notes for Details
- Check Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)/(F96)
- Check for Leak in Air Intake and/or Exhaust
- Check/Replace Manifold/Barometric Pressure Sensor (G71)/(F96)
- Check/Replace Engine Controle Module
Special Notes
- On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.
- The F96 can be an internal part of the ECM.