01324: Difference between revisions
          From Ross-Tech Wiki
          
          
      
      
      
      Table Of Contents
- 
          
          1.
          01324 - Control Module for All Wheel Drive (J492)
          
- 
      
      1.1.1
      01324 - Control Module for All Wheel Drive (J492): No Communications
      
- 1.1.1.2 Possible Symptoms
 
- 1.1.2.2 Possible Causes
 
- 1.1.3.2 Possible Solutions
 
- 1.1.4.2 Special Notes
 
 
 - 
      
      1.1.1
      01324 - Control Module for All Wheel Drive (J492): No Communications
      
 
 Created page with "__FORCETOC__ == 01324 - Control Module for All Wheel Drive (J492) == === 01324 - Control Module for All Wheel Drive (J492): No Communications === ==== Possible Symptoms ====  ..."  | 
				|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 16: | Line 16: | ||
==== Possible Solutions ====  | ==== Possible Solutions ====  | ||
*   | * Inspect electrical paths, repair as needed  | ||
==== Special Notes ====  | ==== Special Notes ====  | ||
* When found in an Audi A6 Allroad (4B) with the [http://wiki.ross-tech.com/wiki/index.php/Audi_A6_%284B%29_Brake_Electronics_%28Bosch_5.3_ABS/EDS/ASR/ESP%29 Bosch 5.3 ABS/EDS/ASR/ESP] system,   | * When found in an Audi A6 Allroad (4B) with the [http://wiki.ross-tech.com/wiki/index.php/Audi_A6_%284B%29_Brake_Electronics_%28Bosch_5.3_ABS/EDS/ASR/ESP%29 Bosch 5.3 ABS/EDS/ASR/ESP] system, the soft coding of the ABS may be incorrect.  | ||
** Many Audi A6 Allroads do not have "Manual with Low Range (only Audi A6 Allroad)"  | ** Many Audi A6 Allroads do not have "Manual with Low Range (only Audi A6 Allroad)".  Try coding the ABS module as "Manual".  | ||
Latest revision as of 20:17, 19 November 2015
01324 - Control Module for All Wheel Drive (J492)
01324 - Control Module for All Wheel Drive (J492): No Communications
Possible Symptoms
- Driveablity issues
 - Warning lights in instrument cluster.
 
Possible Causes
- Control Module for All Wheel Drive (J492) is faulty
 - Electrical path issue
- Wiring harness, ground points, fuses
 
 - Incorrect coding of ABS module
 
Possible Solutions
- Inspect electrical paths, repair as needed
 
Special Notes
- When found in an Audi A6 Allroad (4B) with the Bosch 5.3 ABS/EDS/ASR/ESP system, the soft coding of the ABS may be incorrect.
- Many Audi A6 Allroads do not have "Manual with Low Range (only Audi A6 Allroad)". Try coding the ABS module as "Manual".