Difference between revisions of "01128"
From Ross-Tech Wiki
(Created page with '== 01128 - Immobilizer Pickup Coil (D2) == ==== Possible Symptoms ==== * Immobilizer light flashing * Engine shuts off ==== Possible Causes ==== * Wiring harness issue * De…') |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 3: | Line 3: | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
| − | * Immobilizer | + | * Immobilizer Warning Light flashing |
| − | * Engine shuts | + | * Immobilizer active (Engine shuts OFF after 2-3 Seconds) |
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * Wiring | + | * Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) faulty |
| − | * | + | * Immobilizer Pickup Coil (D2) faulty |
| − | * | + | * Immobilzier Control Module faulty |
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * | + | * Check Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) |
| − | * | + | * Check/Replace Immobilizer Pickup Coil (D2) |
| − | ** Immobilizer 2 and 3 | + | ** Check Measuring Value Blocks (MVB) |
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | * Pickup Coils for Immobilizer 2 and 3 Systems should read ~ 18 to 24 Ω | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 10:37, 31 October 2016
01128 - Immobilizer Pickup Coil (D2)
Possible Symptoms
- Immobilizer Warning Light flashing
- Immobilizer active (Engine shuts OFF after 2-3 Seconds)
Possible Causes
- Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2) faulty
- Immobilizer Pickup Coil (D2) faulty
- Immobilzier Control Module faulty
Possible Solutions
- Check Wiring and/or Connector(s) from/to Immobilizer Pickup Coil (D2)
- Check/Replace Immobilizer Pickup Coil (D2)
- Check Measuring Value Blocks (MVB)
Special Notes
- Pickup Coils for Immobilizer 2 and 3 Systems should read ~ 18 to 24 Ω