Difference between revisions of "User:Jef"

Revision as of 16:00, 23 March 2018

Prerequisites:

Measuring the ride height is done from the center of the wheel, vertically, to the edge of the fender to the closest millimeter.

[Select]
[34 - Level Control]
[Security Access - 16]
Enter 31564
[Do It!]

If the Security Access code does not work, try 31564 in [Login - 11] or [Coding II - 11]

[Adaption - 10]

Channel 01 (front left)
[Read]

[Test]
[Save]
[Yes]

Channel 02 (front right)
[Read]

[Test]
[Save]
[Yes]

Channel 03 (rear left)
[Read]

[Test]
[Save]
[Yes]

Channel 04 (rear right)
[Read]

[Test]
[Save]
[Yes]

Channel 05
[Read]
new value 1
[Test]
[Save]
[Yes]
[Done, Go Back]

Video Link

@@ Line 59: / Line 59: @@
 '''[Done, Go Back] '''<br>
-Notes: how to take measurements
+==== Special Notes ====
-Insert photo
+*These instructions should work with most non-USD Level Control systems found in:
+**A6
+**A8
+**Q7
+**Phaeton
+**Touareg
+**Bentley Continental.
-Default values
- Audi A6 (4F) (PR-1BK): 386 mm (front) and 384 mm (rear)
-Audi A6 (4F) Allroad (PR-1BY): 388 mm (front) and 380 mm (rear)
-Audi A8 (4E) standard suspension (PR-1BK): 416 mm (front) and 398 mm (rear)
-Audi A8/S8 (4E) sport suspension (PR-2MA/2MB): 396 mm (front) and 378 mm (rear)
-Audi Q7 (4L): 449 mm (front) and 465 mm (rear)
-VW Phaeton (3D) RoW (Rest of World):  407 mm (front) and 401 mm (rear)
-VW Phaeton (3D) NAR (North American Region): 417 mm (front) and 411 (rear)
-VW Touareg (7L) standard: 497 mm (front) and 502 mm (rear)
-VW Touareg (7L) offroad: 488 mm (front) and 498 mm (rear)
-North American Phaeton owners:  Please read a very detailed alternate procedure here
-The above values are NOT what you enter into each Adaptation channel. You need to enter the ACTUAL MEASURED VALUES from each corner of the car as explained below.
 Video Link