Difference between revisions of "00194"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == 00194 - Ignition Key Removal Lock == === 00194 - Ignition Key Removal Lock: Implausible Signal === ==== Possible Causes ==== * Communication Failure with Gear Selector M...) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 21: | Line 21: | ||
* May be stored in Combination with [[28775/U0103/049411]]. | * May be stored in Combination with [[28775/U0103/049411]]. | ||
| + | |||
| + | |||
| + | |||
| + | === 00194 - Ignition Key Removal Lock: Open or Short to Ground === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Ignition Key cannot be removed from ignition switch with Transmission in Park. | ||
| + | * PRND21 indicator is not reading correctly in the instrument cluster. | ||
| + | * Ignition Key CAN be removed from ignition switch with Transmission in ANY selector position. | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * The N376-Ignition Key Withdrawal Lock Solenoid could have failed. | ||
| + | * The N376 is loose in the housing. | ||
| + | * There is electrical fault with the wiring/connectors for the N376. | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Verify the N376-Ignition Key Withdrawal Lock Solenoid is installed correctly. | ||
| + | * Verify the N376 is not an Open Circuit' | ||
| + | * Replaced failed N376 with newest/updated part from the manufacture | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | * Most of the above is applicable when found in 2005 and newer Jetta A5, 2006 and newer Volkswagen GTI, Golf, Rabbit and EOS | ||
| + | ** Please see Volkswagen's Tech Tip (28-08-02). It states "DO NOT replace the ignition switch, lock cylinder, or lock housing assembly" before verifying the proper operation of the N376 (sometimes referred to as the 'catch') | ||
| + | *** https://static.nhtsa.gov/odi/tsbs/2013/MC-10157607-9999.pdf NHTSA | ||
| + | ** Use Measuring Value Block Group [005] in the [16-Steering wheel] controller to verify proper operation of the N376. | ||
| + | *** Field (3) in the MVB-[005] must display [On] when any driving position is selected. | ||
| + | *** Field (4) in MVB-[005] must display [Ok] | ||
| + | ** Part number for the "catch" has been updated several times, check with your local parts department for the latest and correct part for the vehicle in question. | ||
| + | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 12:14, 3 March 2021
00194 - Ignition Key Removal Lock
00194 - Ignition Key Removal Lock: Implausible Signal
Possible Causes
- Communication Failure with Gear Selector Module
- Selector Lever (E313) faulty
- Tiptronic Buttons (F189) in Selector Lever (E313) faulty
Possible Solutions
- Check Communication with Gear Selector Module
- Check Selector Lever (E313)
- Check Measuring Value Block (MVB) in Transmission Control Module
- Check Tiptronic Buttons (F189) in Selector Lever (E313)
- Check Measuring Value Block (MVB) in Transmission Control Module
Special Notes
- May be stored in Combination with 28775/U0103/049411.
00194 - Ignition Key Removal Lock: Open or Short to Ground
Possible Symptoms
- Ignition Key cannot be removed from ignition switch with Transmission in Park.
- PRND21 indicator is not reading correctly in the instrument cluster.
- Ignition Key CAN be removed from ignition switch with Transmission in ANY selector position.
Possible Causes
- The N376-Ignition Key Withdrawal Lock Solenoid could have failed.
- The N376 is loose in the housing.
- There is electrical fault with the wiring/connectors for the N376.
Possible Solutions
- Verify the N376-Ignition Key Withdrawal Lock Solenoid is installed correctly.
- Verify the N376 is not an Open Circuit'
- Replaced failed N376 with newest/updated part from the manufacture
Special Notes
- Most of the above is applicable when found in 2005 and newer Jetta A5, 2006 and newer Volkswagen GTI, Golf, Rabbit and EOS
- Please see Volkswagen's Tech Tip (28-08-02). It states "DO NOT replace the ignition switch, lock cylinder, or lock housing assembly" before verifying the proper operation of the N376 (sometimes referred to as the 'catch')
- Use Measuring Value Block Group [005] in the [16-Steering wheel] controller to verify proper operation of the N376.
- Field (3) in the MVB-[005] must display [On] when any driving position is selected.
- Field (4) in MVB-[005] must display [Ok]
- Part number for the "catch" has been updated several times, check with your local parts department for the latest and correct part for the vehicle in question.