Difference between revisions of "P068A/001674"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) (Created page with '== P068A/001674 - ECM Power Relay Load Circuit: De-Energized Performance Too Early == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) ON ==== Possible Causes =…') |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 17: | Line 17: | ||
* Check Wiring and/or Connector(s) from/to Power Supply Relay (J271/J317) | * Check Wiring and/or Connector(s) from/to Power Supply Relay (J271/J317) | ||
* Check/Replace Power Supply Relay (J271/J317) | * Check/Replace Power Supply Relay (J271/J317) | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | |||
| + | * A weak Battery may set this fault code. Insure the Battery voltage is at least 11.5v. | ||
| + | * 2009-2014 Audi vehicles with no start issues, please see TSB 97-14-2 or TPI 2036764 for possible updated J271 relay. | ||
| + | ** https://static.nhtsa.gov/odi/tsbs/2014/SB-10055713-5611.pdf NHTSA | ||
| + | |||
| + | |||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 10:27, 30 March 2021
P068A/001674 - ECM Power Relay Load Circuit: De-Energized Performance Too Early
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Fuse(s) faulty
- Ignition Switch faulty
- Wiring and/or Connector(s) from/to Power Supply Relay (J271/J317) faulty
- Power Supply Relay (J271/J317) faulty
Possible Solutions
- Check Fuse(s)
- Check Wiring and/or Connector(s) from/to Power Supply Relay (J271/J317)
- Check/Replace Power Supply Relay (J271/J317)
Special Notes
- A weak Battery may set this fault code. Insure the Battery voltage is at least 11.5v.
- 2009-2014 Audi vehicles with no start issues, please see TSB 97-14-2 or TPI 2036764 for possible updated J271 relay.