16507/P0123/000291: Difference between revisions

Created page with '== 16507/P0123/000291 - Throttle Position Sensor (G69): Signal too High == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) ON ==== Possible Causes ==== * Fuse…'
 
Jef (talk | contribs)
 
(One intermediate revision by one other user not shown)
Line 4: Line 4:


* Malfunction Indicator Light (MIL) ON
* Malfunction Indicator Light (MIL) ON
* EPC Light On
* Increased Idle Speed
* Bucking at Load Change


==== Possible Causes ====
==== Possible Causes ====
Line 9: Line 12:
* Fuse(s) faulty
* Fuse(s) faulty
* Wiring and/or Connector(s) from/to Throttle Position Sensor (G69) faulty
* Wiring and/or Connector(s) from/to Throttle Position Sensor (G69) faulty
* Throttle Position Sensor (G69) faulty
* Throttle Position Sensor(s) Faulty
* Throttle Body dirty
* Throttle Body faulty


==== Possible Solutions ====
==== Possible Solutions ====
Line 15: Line 20:
* Check Fuse(s)
* Check Fuse(s)
* Check Wiring and/or Connector(s) from/to Throttle Position Sensor (G69)
* Check Wiring and/or Connector(s) from/to Throttle Position Sensor (G69)
* Clean Throttle Body and complete TBA
* Check Throttle Body Wiring
* Check Throttle Body
* Check/Replace Throttle Position Sensor (G69)
* Check/Replace Throttle Position Sensor (G69)
** Check Measuring Value Blocks (MVB)
** On DBW Vehicles This Includes Accelerator Pedal Position Sensor 1 (G79) and  2 (G185).
** On DBC Vehicles This Includes Throttle Position Sensor G69 and G88.
 
==== Special Notes ====
 
* See [[Throttle Body Alignment (TBA)]]
* Use Meas. Blocks & Basic Setting for testing
* Check for proper seating at the ignition coils.
* When found in the  2006 - 2009 NAR (North American Region) VW Jetta,Rabbit, GTI,Passat, Eos with the [[2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)|2.0l TFSI]]: (BPY, CCTA and CBFA) check TSB 01-09-04 or 2018652 for a wiring repair at the Throttle Body.
** https://static.nhtsa.gov/odi/tsbs/2017/MC-10123172-9999.pdf  NHTSA
* When found in the  2005 - 2009 NAR (North American Region) Audi TT, A3, A4, A6, Q7 with a FSI engine check TSB 97-08-25 or 2018260 for a wiring repair at the Throttle Body. ''(The previous Audi TSB was 90-08-21)''
** https://static.nhtsa.gov/odi/tsbs/2014/MC-10124818-9999.pdf  NHTSA
 


__FORCETOC__
__FORCETOC__
[[Category:Fault Codes]]
[[Category:Fault Codes]]

Latest revision as of 16:26, 30 March 2021

16507/P0123/000291 - Throttle Position Sensor (G69): Signal too High

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • EPC Light On
  • Increased Idle Speed
  • Bucking at Load Change

Possible Causes

  • Fuse(s) faulty
  • Wiring and/or Connector(s) from/to Throttle Position Sensor (G69) faulty
  • Throttle Position Sensor(s) Faulty
  • Throttle Body dirty
  • Throttle Body faulty

Possible Solutions

  • Check Fuse(s)
  • Check Wiring and/or Connector(s) from/to Throttle Position Sensor (G69)
  • Clean Throttle Body and complete TBA
  • Check Throttle Body Wiring
  • Check Throttle Body
  • Check/Replace Throttle Position Sensor (G69)
    • On DBW Vehicles This Includes Accelerator Pedal Position Sensor 1 (G79) and 2 (G185).
    • On DBC Vehicles This Includes Throttle Position Sensor G69 and G88.

Special Notes