P307A/012410: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
P307A/012410 - Air Intake System: Flow too Low
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
Created page with '__FORCETOC__ == 012410/P307A - Air Intake System: Flow too Low == ==== Possible Symptoms ==== * MIL on ==== Possible Causes ==== ==== Possible Solutions ==== ==== Special…' |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== 012410 | == P307A/012410 - Air Intake System: Flow too Low == | ||
==== Possible Symptoms ==== | ==== Possible Symptoms ==== | ||
* MIL on | * MIL on | ||
* Erratic idle | |||
* Poor engine performance under load | |||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
* Dirty Throttle Body | |||
* Defective Throttle Body | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Clean Throttle Body and perform [[Throttle Body Alignment (TBA)]] | |||
* Replace Throttle Body and perform [[Throttle Body Alignment (TBA)]] | |||
==== Special Notes ==== | ==== Special Notes ==== | ||
Latest revision as of 15:38, 3 February 2022
P307A/012410 - Air Intake System: Flow too Low
Possible Symptoms
- MIL on
- Erratic idle
- Poor engine performance under load
Possible Causes
- Dirty Throttle Body
- Defective Throttle Body
Possible Solutions
- Clean Throttle Body and perform Throttle Body Alignment (TBA)
- Replace Throttle Body and perform Throttle Body Alignment (TBA)
Special Notes
- When found with DTC 16452/P0068/000104, clean the Throttle Body and perform Throttle Body Alignment (TBA).