Difference between revisions of "User:Jef"

From Ross-Tech Wiki
 
(84 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
IDE02664-MAS02263 Switch for folding top - Convertible top open position switch not activated F171
+
== Contacting Ross-Tech ==
−
The F171 is located on the right side at the main bearing or hinge. When the top is stored in the convertible top box it reports Operated.
 
  
−
IDE02664-MAS02264 Switch for folding top - Convertible top front closed position switch operated F202
+
Blah blah blah, if additional assistance is needed, our registered customers can submit an auto-scan for review blah blah blah
−
The F202 is located on the right side "rear roof linkage".  When the Front Roof Linkage and Rear Roof Linkage are inline or close to being inline with each other, the sensor will report operated.
 
  
−
IDE02664-MAS02265 Switch for folding top - Convertible top latch -open- switch not activated F294
+
Once the Auto-Scan is complete, click on the small VCDS icon in the top left corner, then select '''[Copy and Submit Auto-Scan]'''.
−
The F294 is located with the right side lock on the Front Roof Cross Member.  When the right side hook is fully unlocked, it reads Operated.
 
  
−
IDE02664-MAS02266 Switch for folding top - Convertible top left lock switch operated F169
+
https://i.imgur.com/XbVYS1j.jpg
−
The F169 is located with the left side lock on the Front Roof Cross Member. When the left side hook is fulling locked, it reads Operated.
 
  
−
Note that when the top opens and is stored, the hooks go from an unlocked position to locked position.  And when closing the top, they go to an unlocked position right after the top lifts out of the storage compartment.
 
  
−
IDE02664-MAS02268 Switch for folding top - Switch for folding top closed: left operated F411
+
This will load up a special web page with a form to fill out.  Please verify you type in your correct email address.
−
The F411 is located in the left side of the windshield frame.  When the left hook is fully engaged to the windshield frame, it reads Operated.
 
  
−
IDE02664-MAS02269 Switch for folding top - Switch for folding top closed: right operated F412
+
The Short Serial Number is on your Ross-Tech device, you will find that on the sticker.  It might be something like:
−
The F411 is located in the right side of the windshield frame.  When the right hook is fully engaged to the windshield frame, it reads Operated.
+
* HN2-xxxxxx
 +
* H17-xxxxxx
 +
* HCxxxxxx
 +
* UCxxxxxx
  
−
IDE02664-MAS02270 Switch for folding top - Upper tensioning bow switch not activated F408
+
In the Comments box, document the issue or concern.  Once you have that typed out, in the Comment box, right click your mouse and then select '''[Paste]'''.  
−
The F408 is located on the right side hinge, on the Tensioner.  This the U shaped frame below the rear window.  When the Tersioner frame is fully lifted, the F408 reports Operated.
 
  
−
IDE02664-MAS02271 Switch for folding top - Left tensioning bow switch operated F409
+
https://i.imgur.com/OJLxxx8.jpeg
−
The F409 is located with the left side Hydraulic cylinder for the Tensioner.
 
−
When the left hydraulic cylinder is extended, thus the Tensioner is fully seated onto the Convertible Top Box Lid, the F409 reports Operated.
 
  
−
IDE02664-MAS02272 Switch for folding top - Right tensioning bow switch operated F410
+
https://i.imgur.com/5Wc30hQ.jpeg
−
The F410 is located with the right side Hydraulic cylinder for the Tensioner.
 
−
When the right hydraulic cylinder is extended, thus the Tensioner is fully seated onto the Convertible Top Box Lid, the F410 reports Operated.
 
  
−
IDE02664-MAS02273 Switch for folding top - Convertible top compartment -open- switch not activated F407
+
You should see the data from the Auto-Scan populate the Comments field after you paste.
−
The F407 is located with the left side hinge assembly.  When the Convertible Top Box Lid is fully raised the F407 reports Operated.
+
 
 +
Click the '''[Send Email!]''' that is below the Comments box once the form is filled out.
 +
 
 +
The Ross-Tech support team will reply back once we have an answer to provide.  We also have a Ross-Tech Forum where you should post your scan and questions:
 +
 
 +
'''https://forums.ross-tech.com/index.php'''
 +
 
 +
That is the best place to get help from the greatest variety of different people, in a place where answers will be searchable in the future as well.

Latest revision as of 15:35, 27 March 2025

Contacting Ross-Tech

Blah blah blah, if additional assistance is needed, our registered customers can submit an auto-scan for review blah blah blah

Once the Auto-Scan is complete, click on the small VCDS icon in the top left corner, then select [Copy and Submit Auto-Scan].

XbVYS1j.jpg


This will load up a special web page with a form to fill out. Please verify you type in your correct email address.

The Short Serial Number is on your Ross-Tech device, you will find that on the sticker. It might be something like:

  • HN2-xxxxxx
  • H17-xxxxxx
  • HCxxxxxx
  • UCxxxxxx

In the Comments box, document the issue or concern. Once you have that typed out, in the Comment box, right click your mouse and then select [Paste].

OJLxxx8.jpeg

5Wc30hQ.jpeg

You should see the data from the Auto-Scan populate the Comments field after you paste.

Click the [Send Email!] that is below the Comments box once the form is filled out.

The Ross-Tech support team will reply back once we have an answer to provide. We also have a Ross-Tech Forum where you should post your scan and questions:

https://forums.ross-tech.com/index.php

That is the best place to get help from the greatest variety of different people, in a place where answers will be searchable in the future as well.

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=User:Jef&oldid=9694"