Difference between revisions of "00566"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 13: | Line 13: | ||
* Check Fuse(s) | * Check Fuse(s) | ||
| − | * Check Power Supply/Battery | + | * Check Power Supply/Battery |
| + | ** Use Meas. Block group [038] (if applicable) | ||
* Check Pump Unit | * Check Pump Unit | ||
** Use Meas. Blocks | ** Use Meas. Blocks | ||
| + | * Turn the ignition OFF, then back ON after 10 seconds, try to clear fault codes, repeat as needed. | ||
| + | ** If the fault code 00566 does not clear, the J500 may need to be replaced. | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
Latest revision as of 12:43, 13 June 2025
00566 - Steering Assistance Operation
00566 - Steering Assistance Operation: Implausible Signal
Possible Causes
- Fuse(s) faulty
- Battery Voltage too Low
- Pump Unit faulty
Possible Solutions
- Check Fuse(s)
- Check Power Supply/Battery
- Use Meas. Block group [038] (if applicable)
- Check Pump Unit
- Use Meas. Blocks
- Turn the ignition OFF, then back ON after 10 seconds, try to clear fault codes, repeat as needed.
- If the fault code 00566 does not clear, the J500 may need to be replaced.
Special Notes
- For Seat Cordoba/Ibiza (6L), Skoda Fabia (6Y) and VW Polo (9N) see MVB 002.