Difference between revisions of "Audi Q7 (4L) Airbag"
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
== Adaptation == | == Adaptation == | ||
| − | + | Mostly used to deactivate individual airbag components (see repair manual for details). | |
| + | |||
| + | === Channel 050: ESP-Data (Powertrain) === | ||
| + | * 2 = All-Wheel-Drive (AWD) | ||
| + | |||
| + | === Channel 051: ESP-Data (Brake) === | ||
| + | * 04 = Front Axle 350x34 (PR-1LF) & Rear Axle 330x28 (PR-1KF) | ||
| + | * 04 = Front Axle 350x34 (PR-1LF) & Rear Axle 358x28 (PR-2EA) | ||
| + | * 06 = Front Axle 350x34 (PR-1LF) & Rear Axle 358x28 (PR-1KD) | ||
| + | * 10 = Front Axle 374x36 (PR-1LT) & Rear Axle 358x28 (PR-1KD) | ||
| + | |||
== Basic Setting == | == Basic Setting == | ||
| − | |||
=== Seat Occupied Recognition Control Module (J706) === | === Seat Occupied Recognition Control Module (J706) === | ||
| Line 17: | Line 26: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[15 - Airbags]'''<br> | '''[15 - Airbags]'''<br> | ||
| − | '''[ | + | '''[Security Access - 16]'''<br> |
Enter 20324, to enable the basic setting.<br> | Enter 20324, to enable the basic setting.<br> | ||
'''[Do it!]'''<br> | '''[Do it!]'''<br> | ||
| Line 30: | Line 39: | ||
== Special Procedures == | == Special Procedures == | ||
| − | |||
=== Seat Occupied Recognition Control Module (J706): Reset === | === Seat Occupied Recognition Control Module (J706): Reset === | ||
| Line 44: | Line 52: | ||
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[15 - Airbags]'''<br> | '''[15 - Airbags]'''<br> | ||
| − | '''[ | + | '''[Security Access - 16]'''<br> |
Enter 20324, to enable the basic setting.<br> | Enter 20324, to enable the basic setting.<br> | ||
'''[Do it!]'''<br> | '''[Do it!]'''<br> | ||
Latest revision as of 11:57, 4 May 2009
Coding
VAG-COM will automatically tell you a suggested coding (HEX interface required), otherwise contact us for assistance.
Adaptation
Mostly used to deactivate individual airbag components (see repair manual for details).
Channel 050: ESP-Data (Powertrain)
- 2 = All-Wheel-Drive (AWD)
Channel 051: ESP-Data (Brake)
- 04 = Front Axle 350x34 (PR-1LF) & Rear Axle 330x28 (PR-1KF)
- 04 = Front Axle 350x34 (PR-1LF) & Rear Axle 358x28 (PR-2EA)
- 06 = Front Axle 350x34 (PR-1LF) & Rear Axle 358x28 (PR-1KD)
- 10 = Front Axle 374x36 (PR-1LT) & Rear Axle 358x28 (PR-1KD)
Basic Setting
Seat Occupied Recognition Control Module (J706)
If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed.
[Select]
[15 - Airbags]
[Security Access - 16]
Enter 20324, to enable the basic setting.
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The reset has been performed.
[Done, Go Back]
[Close Controller, Go Back - 06]
Special Procedures
Seat Occupied Recognition Control Module (J706): Reset
If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too.
Prerequisites:
- Seat in normal position.
- Seat must NOT be occupied during the whole procedure.
- Seatbelt must NOT be plugged in.
- No faults in the system.
- Interior temperature must be between 0 °C and 37 °C (32 °F and 98 °F).
[Select]
[15 - Airbags]
[Security Access - 16]
Enter 20324, to enable the basic setting.
[Do it!]
[Adaptation - 10]
Channel 000
[Read]
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]